Freeway Trailer Sales Inc.
7100 Pacific Hwy East
Milton, Wa. 98354
1-800-992-5644
1-253-922-0771

Hours
Mon-Sat 8:30am - 5:00pm
Sunday - Closed


follow Freeway Trailer Parts on Facebook

Login Status  Login Status

Not logged in

Login
 
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
Checkout
 

Freeway Trailer Sales Inc, Trailers - Automotive Utility, Milton, WA


PayPal Acceptance Mark

Home » Manufacturers » Tie Down Engineering

 Checkout
SEARCH
12114 Stainless Steel Caliper Slide Pin
Product ID: 12114
Manufacturer: Tie Down Engineering

Details 

Stainless steel slide pin for Tiedown Engineering Eliminator series vented disk brakes. Sold Seperalty
Price: $7.99

Add to cart

80327 Flexible Brake Line Axle Add-on Kit
PREV1 of 2NEXT
Product ID: 80327
Manufacturer: Tie Down Engineering

Details 

Tie-Down Engineering add-on axle brake line kit for disc or drum brakes. This kit has all the necessary hardware to plumb an additional axle to an existing brake line system. Kit contains flexible brake line that is designed to be coiled, not cut, if the line is too long. All tubing is D.O.T. approved
Price: $49.99

Add to cart

82084 Eliminator Replacement Disk Brake Pad Set
Product ID: 82084
Manufacturer: Tie Down Engineering

Details 

This replacement pad set has enough pads to replace both sides of a single axle hydraulic surge disk brake system using the Tiedown Engineering Eliminator vented disk brake.
Price: $53.99

Add to cart

80326 Single Axle Flexible Brake Line Kit
PREV1 of 2NEXT
Product ID: 80326
Manufacturer: Tie Down Engineering

Details 

Tie-Down Engineering single axle brake line kit for disc or drum brakes. This kit has all the necessary hardware to plumb a single axle trailer with 2 brakes. Kit contains flexible brake line that is designed to be coiled, not cut, if the line is too long. All tubing is D.O.T. approved
Price: $81.99

Add to cart

46304A Eliminator E-coat Disk Brake Caliper
PREV1 of 2NEXT
Product ID: 46304A
Manufacturer: Tie Down Engineering

Details 

This is the replacement caliper with pads from Tie Down Engineering. This loaded aluminum caliper has an E-coat black finish helps protect the caliper from salt corrosion. Fits the Eliminator vented 9.6", 10" and 12" disk brake versions. All aluminum caliper, 380 series alloy, sheds heat five times faster than traditional cast iron calipers. Brass bleeder valves. Oil impregnated bronze slider pin bushings. Bi-metal piston. Brake Pads with GalvX coated brake pad backing plates to further reduce areas susceptible to corrosion.

This Caliper does not come with the stainless steel glide pins. This caliper only replaces calipers stamped 46304.
Price: $112.99

Add to cart

80328 Tandem Axle Flexible Brake Line Kit
PREV1 of 2NEXT
Product ID: 80328
Manufacturer: Tie Down Engineering

Details 

Tie-Down Engineering tandem axle brake line kit for disc or drum brakes. This kit has all the necessary hardware to plumb a tandem axle trailer with 4 brakes. Kit contains flexible brake line that is designed to be coiled, not cut, if the line is too long. All tubing is D.O.T. approved
Price: $135.99

Add to cart

86124 5' Load Guide Kit
PREV1 of 2NEXT
Product ID: 86124
Manufacturer: Tie Down Engineering

Details 

Tie Down bunk board guide ons fits frames up to 4-1/4 inches in size. All hardware is hot dip galvanized for corrosion protection. The bunk boards mount 19 inches above the trailer frame and have 13 inches of side movement on each side. Sold in pairs with all hardware included.
Price: $166.99

Add to cart

82113 9.6" Galv-X Vented Disc Brakes
Product ID: 82113
Manufacturer: Tie Down Engineering

Details 

Vented Disc Brakes - 9.6", Integral Hub, 5 Stud, Galv-X Rotor.These vented disc brakes were specifically designed and engineered for high capacity performance and saltwater immersion. The use of ribbed and vented all-aluminum 380 alloy calipers, results in heat being shed five times faster than traditional cast iron calipers. These brakes don't get as hot and cool much faster than conventional trailer brakes.Will work with 13" trailer wheels
Price: $189.99

Add to cart

82100 12" Galv-X Vented Disc Brakes
Product ID: 82100
Manufacturer: Tie Down Engineering

Details 

Vented Disc Brakes - 12" Integral Hub, 6 Stud, Galv-X Rotor. These vented disc brakes were specifically designed and engineered for high capacity performance and saltwater immersion. The use of ribbed and vented all-aluminum 380 alloy calipers, results in heat being shed five times faster than traditional cast iron calipers. These brakes don't get as hot and cool much faster than conventional trailer brakes.
Price: $229.99

Add to cart