This Trimark handle was designed for some enclosed cargo trailer applications, toppers, liftgate and baggage doors where 1/4 turn clockwise cam locking is desired. It features a low profile handle that pops up when actuated for ease of use.

Comes with 2 keys and has 2 conveniently concealed mounting holes under the pop cover that are 2-3/4" center spaced. 1/4" clockwise rotation to open. comes with rubber mounting gasket. Non threaded shank length is 2-3/4"

Keyed TM911

Most commonly used on Wells Cargo MPT trailers and Haulmark Flex trailers.

Cam paddle sold separately

1" x 36-Yards 45-Mil 3M™ VHB™ Double sided commercial trailer skin bonding tape. Used for commercial vehicle panel attachment such as trailers, truck bodies, ambulances, fire trucks and buses. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Virtually invisible fastening keeps surfaces smooth. 3M™ pioneered the use of durable acrylic foam tapes to attach sidewall panels and roofs on cargo trailers, eliminating the need for screws and rivets

90" wide smooth aluminum transition flap can be cut down for smaller width trailers. Includes full length welded on aluminum hinge for easy installation. Gap filler is 10-3/8" long with hinge. Main body is 9" long and has a break at 2" to allow for a cleaner angle of approach. Overall width is 90". This transition flap installs on the floor inside of enclosed cargo trailers and flaps down over the gap between the floor and the top of the ramp so it is easier to roll items over without getting stuck in between. This item is 3/16" thick.

16" deep x 87-1/2" wide x 3/4" thick PlexCore wood ramp extension starter flap with hinge. This ramp extension can be cut down for smaller width trailers.

What is PlexCore?

PlexCore is a hybrid cargo panel product that evolved out of the tough end-use requirements of the RV and marine industries. This high performance engineered board panel is comprised of many dense wood fiber strands harvested from sustainable forests that are formed under intense pressure into a multi-layer panel and bonded at high temperatures using 100% MDI exterior resins which reduce moisture absorption . PlexCore Cargo panels are the very best available, and built to withstand rugged long term use, has no knots or splits. Solid and dense uniformity for superior screw holding ability.

Overhead ramp spring assist fits most 4', 5', and 6' wide enclosed trailer brands. Main tube bar is 72" and can be cut down to fit a wide range of trailer widths. This is a single spring assist with 2 drums. Can be used in a single or dual cable application. Comes with mounting brackets for universal installations. Load bearing capacity of up to 200 lbs.

Ramp cables are not included

This heavy duty aluminum ramp extension starter flap comes reinforced for the toughest loads. Lasts longer and is more durable over wood starter flaps. 84" overall length x 12-3/4" deep x 1-1/8" thick at hinge and tapers as to slopes toward the ground. This item is usually cut down for smaller width enclosed ramp door trailers.

Overhead ramp spring assist fits most 7' wide enclosed trailer brands. Main tube bar is 80" and can be cut down to fit a wide range of trailer widths. This is a dual spring assist with 2 drums. designed to be used with dual cable application. Comes with mounting brackets for universal installations. Load bearing capacity of 210 lbs to 240 lbs.

Ramp cables are not included

Overhead ramp spring assist fits most 7-1/2', 8' and 8-1/2' wide enclosed trailer brands. Main tube bar is 96" and can be cut down to fit a wide range of trailer widths. This is a dual spring assist with 2 drums. designed to be used with dual cable application. Comes with mounting brackets for universal installations. Load bearing capacity of 280 lbs to 320 lbs.

Ramp cables are not included