Filter Results
Sort Order
Axle Specifications
Light Function
Jack Type
Tire Specifications
Manufacturer
Home
» All Products
« Previous12345678910... »
ID 006-011-00
006-011-00 5/16" Suspension Nut

5/16" Nut used on the rear end of a slipper spring.

Price$0.99
ID 006-080-00
6-80 1/2"-20 Zinc Plated Lug Nut

1/2"-20 thread pitch Zinc plated lug nut. 60 Degree conical seat. Overall length is 10/16". Socket size is 13/16"

Price$0.99
ID 2800515
2800515 P-Shaped Foam Rubber Fender and Rock Guard Seal - by the foot
1 of 3

1-1/4" Tall x 0.380" diameter P-Shaped foam rubber bulb seal with reinforcement leg (leg is 7/8" tall x 0.17" wide). Can be used on almost all enclosed trailer brands for trimming out the fenders or the rock guard.

Price$0.99
ID A46PB
A46PB 2 Prong Right Angle Marker Light Plug
1 of 2
  • 2 prong Standard PL-10 plug with male pins; bare lead wires and #10 ring terminal on ground wire
  • For use with sealed marker/clearance and utility lights
Price$0.99
ID APL1CB
APL1CB Clear Replacement Lens

Replacement clear lens uses a snap-in design

Lens Only

Price$0.99
ID 005-101-00
005-101-00 1"ID - D-Shaped Tang Washer

Dexter Axle E-Z Lube Tang Washer 1" inner diameter with D-shaped flat spot

Price$1.99
ID 005-164-00
005-164-00 13/16"ID - D-Shaped Spindle Washer 3/32" Thick

This D-shaped washer fits 13/16" threaded trailer spindles with a flat spot. 1-5/8" Outside diameter, 13/16" Inside diameter. 3/32" Thick. Commonly used on 2,500-3,500 lb. axles. Used on Trailer Buddy-UFP Axles, EZ Loader Axles.

Same as EZ Loader # 290-034115 and Old UFP #32402

Price$1.99
ID 006-007-00
006-007-00 9/16" Shackle Nut

9/16-18 self locking shackle nut

Price$1.99
ID 006-210-00
006-210-00 13/16"ID Spindle nut
  • 13/16" I.D. (0.768") trailer axle spindle nut
  • Fine thread
  • Thread size 13/16" x 20 (thread count)
  • Used with "D" style spindles with a cotter pinhole.
  • Common on Trailer Buddy-UFP, Loadrite, and EZ-Loader trailer axles.
  • Use with axle nut retainer to complete the installation.

Same as EZ Loader Part# 290-010492 and Old UFP# SN813 and 32414.

Price$1.99
ID 006-211-00
006-211-00 Spindle Nut Retainer

This spindle nut retainer (Named Cookie-Cutter for shape) is used to retain the Spindle Nut once the pre-load is set. Cookie cutter style axle nut retainer. Common on EZ-Loader Boat Trailers, Trailer Buddy Axles, and Loadrite trailers.

Fits over 13/16" spindle nut.

Same as EZ Loader # 290-001405

Same as Old UFP # 32418 and LS813

Price$1.99
ID 007-007-00
007-007-00 5/16" Suspension Bolt

5/16" suspension bolt used on rear end of spring on slipper suspension systems

Price$1.99
ID 010-045-00
010-045-00 Oil Bath O-ring

Replacement O Ring that's 2.609" for oil bath caps. Fits 021-035-00 Dexter threaded oil bath caps.

Price$1.99
ID 085-001-00
085-001-00 EZ Lube Cap Plug

Rubber EZ Lube cap plug, fits 1.18" center hole grease caps. use with the EZ Lube systems.

Fits the following grease caps

  • 021-041-01 - 5 Lug grease cap
  • 021-042-01 - 6 Lug grease cap
  • 021-043-01 - 8 Lug grease cap
Price$1.99
ID 2751206
2751206 D-Shaped Foam Rubber Door Seal
1 of 2

0.5" x 0.696" Foam rubber door bulb seal with reinforcement leg. Can be used on almost all enclosed trailer brands for either side entry doors, road side car exit doors, rear swing doors, and ramp style doors.

Price$1.99
ID A36AB
A36AB Replacement Amber Lens
Red replacement lens for MC36AB and MCL36AB marker lights
Price$1.99
ID A36RB
A36RB Replacement Red Lens
Red replacement lens for MC36RB and MCL36RB marker lights
Price$1.99
ID A47PB
A47PB 3 Prong Right Angle Taillight Plug
1 of 2
  • 3 prong Standard PL-3 plug with male pins, bare lead wires and #10 ring terminal on ground wire
  • For use with stop/turn/tail, parking/turn and warning lights
Price$1.99
ID A91GB
A91GB Flush Mount Grommet for Mini Sealed Lights
1 of 2
Black rubber flush mount grommet for mini sealed lights. Fits most standard model 15 series rectangular marker lights.
Price$1.99
ID B2447BZ
B2447BZ Tarp Hook
  • Ideal for securing a tarp pull rope to your dump body or trailer.
  • 3-1/4" long
  • Mounting hole diameters: 9/13"
  • Corrosion resistant zinc-plated finish.

Price$1.99
ID SNAPPIN
66066 1/4" x 3-1/2" Yellow Zinc Plated Snapper Pin
1 of 2

1/4" Diameter X 3-1/2" Usable With Handle Yellow Zinc Plated Snapper Pin. Simply pull the wire loop over the pin to lock it in place. It quickly releases for easy removal. Zinc-plated for corrosion resistance

Price$1.99
« Previous12345678910... »