Trailer Axles and Axle Repair Parts at Freeway Trailer Sales

ID B12H-74

B12H-74 12" x 2" Right Hand Dacromet Free-Backing Hydraulic Trailer Brake

The B12H-74 12" x 2" Right Hand Free Backing Hydraulic Dacromet Brake Assembly - 6'000lb Capacity Per Pair.

This hydraulic brake assembly includes standard features such as Dacromet backing plates, Stainless steel hardware, uni-servo aluminum wheel cylinder and glued shoes linings for long life, especially for the marine applications. Marine-grade hydraulic drum brake assembly is great for boat trailers. Designed for use with surge-type trailer brake actuators. Corrosion-resistant Dacromet steel construction.

Free backing assembly incorporates a “fall-away” shoe which diminishes shoe drag when backing up. Requires periodic manual adjustment. Marine cluster has galvanized back plate, stainless steel spring hardware, aluminum wheel cylinder and glued marine brake shoe linings. Free-backing brakes let your trailer move in reverse without the brakes being activated by your surge actuator. This brake is used in drum surge applications and are needed if your actuator does not have a reverse lockout, which is a mechanism that ensures that the actuator does not activate when your rig moves in reverse.

Right hand (Passenger's side)
Free backing
Dacromet corrosion resistant coating
For use with a 12" inside diameter drum
Rated for 6,000lb axles (3,000lbs each)
Standard 5 on 3-7/8"" center bolt mount flange - universally fits all standard axle flange bolt pattern.

Price$92.99

ID SFA-1752

1 of 2

SFA-1752 Replacement Spindle for up to 3,500 LB Axles

Weld-on replacement spindle kit. This round bar, tapered trailer axle spindle is made from solid steel, carries a 1,750 pound rating per axle and includes a 4-hole flange for mounting a brake backing plate and a grease zerk for easy bearing lubrication maintenance. The inner bearing surface is 1.376 inch diameter (L68149) and the outer bearing surface is 1.061 inch diameter. (L44649) The seal surface diameter is 1.72 inch (171255TB). The axle's mounting surface is 1-3/4 inch diameter. Includes nut, washer, cotter pin and grease zerk.

1.376 inch diameter inner bearing surface
1.061 inch diameter outer bearing surface
1.75 inch diameter mounting surface
4-hole flange for mounting brake backing plate
See picture 2 for spindle dimesions
Includes spindle, nut, washer, cotter pin and grease zerk
Capacity: 1,750 lbs.
Thread: 1"-14

Spindle kit includes: 1 side only of the following items

spindle
spindle nut
washer
cotter pin

bearings not included

Price$101.99

ID 2024013264

1 of 6

2024013264 3500lb 5 on 4-1/2" Bolt Pattern 10" Pre-Greased Brake Drum Kit

The Lippert 2024013264 pre greased 10" hub and drum kit has a 5 on 4-1/2" bolt pattern and fits 3500lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with a Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 10" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - K-122460 Integrated hub-and-drum with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 10" x 2-1/4" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 1750 lbs. capacity per side
1 - L44649 bearing cone (pre-greased and pre-installed)
- 1-1/16" (1.063") inner diameter
1 - L68149 bearing cone (pre-greased and pre-installed)
- 1-3/8" (1.378") inner diameter
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
1 - 171255TB Grease seal (See Note)
- 1.719" inner diameter
- 2.565" outer diameter
1 - 1.98" outer diameter lube style cap
1 - Rubber lube style cap plug
5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 1" round spindle washer (1.03" ID x 1.68" OD)
1 - 1" 6 slotted spindle nut
1 - 1-3/4" cotter pin

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

Price$105.99

ID 008-201-09

1 of 4

008-201-09 6000lb 6 on 5-1/2" Bolt Pattern 12" Brake Drum

Dexter 8-201-9 12" hub and drum fits 5000lb and 6000lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 3000 lbs. capacity per side
1 - 15245 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 15123 outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048 which has a 1.250" inner diameter. This drum uses a 15123 outer bearing which is the same bearing inner diameter and will fit the 5000lb and 5200lb axles. The only difference is the outer bore of the drum. If you have LM67048 outer bearings then we recommend buying the 15123 bearing that fits this.

Price$117.99

ID 008-247-12

1 of 4

008-247-12 3500lb 5 on 4-3/4" Bolt Pattern 10" Brake Drum

Dexter 8-247-12 10" hub and drum fits 3500lb capacity axles and has a 5 on 4-3/4" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 5 on 4-3/4" lug bolt pattern (see image on how to measure lug spacing)

Works with 10" x 2-1/4" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 1750 lbs. capacity per side
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
Works with L68149 outer bearing cone and L68149 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$119.99

ID 008-249-05

1 of 4

008-249-05 3500lb 5 on 5-1/2" Bolt Pattern 10" Brake Drum

Dexter 8-249-5 10" hub and drum fits 3500lb capacity axles and has a 5 on 5-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 5 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 10" x 2-1/4" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 1750 lbs. capacity per side
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
Works with L68149 outer bearing cone and L68149 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$119.99

ID 008-249-07

1 of 4

008-249-07 3500lb 5 on 5" Bolt Pattern 10" Brake Drum

Dexter 8-249-7 10" hub and drum fits 3500lb capacity axles and has a 5 on 5" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 5 on 5" lug bolt pattern (see image on how to measure lug spacing)

Works with 10" x 2-1/4" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 1750 lbs. capacity per side
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
Works with L68149 outer bearing cone and L68149 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$119.99

ID 008-201-05

1 of 4

008-201-05 5200lb 6 on 5-1/2" Bolt Pattern 12" Brake Drum

Dexter 8-201-5 12" hub and drum fits 5000lb and 5200lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 2600 lbs. capacity per side
1 - LM67010 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with LM67048 outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048. Please verify you have this outer bearing number before ordering.

Price$121.99