Filter Results
Sort Order
Axle Specifications
Tire Specifications
Manufacturer
Home
» Axle Components
» Idler Hubs
« Previous12 Next »
ID 2-150A-04-0300
2-150A-04-0300 2200lb SHORTY 5 on 4-1/2" Bolt Pattern Hub Kit with 1-1/16" Bearing Set
1 of 6
2-150A-04-0300 2200lb SHORTY 5 on 4-1/2" Bolt Pattern Hub Kit with 1-1/16" Bearing Set

Complete BT150A Shorty idler hub kit for 1250lb to 2200lb capacity axles and use a 1-1/16" inner diameter bearing combination on a straight shaft spindle. This hub has a 5-1/2" diameter flange.

Kit includes:

  • 1 -BT150A Idler hub with a 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
    • 5-1/2" diameter flange
    • 3-1/2" overall height
    • 1/2"-20 thread pitch lug studs
    • Rated 1100 lbs. capacity per side
  • 2 - L44649 bearings
    • 1-1/16" (1.063") inner diameter
  • 2 - L44610 bearing races (pre-installed)
  • 1 - 12192TB Grease sea
    • 1.249" inner diameter
    • 1.987" outer diameter
  • 1 - 1.98" outer diameter standard style cap
  • 5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

For use with 8", 10" and 12" wheels only

Please note: This is a specialty hub kit and normally only fits older EZ Loader and Loadrite boat trailers, and some older agricultural trailer axles. Please verify the overall height before ordering. This kit is not pre-assembled or pre-greased.

Price$85.99
ID K08-248-1G
K08-248-1G 3500lb 5 on 4-1/2" Bolt Pattern Pre-Greased Idler Hub Kit with 1-1/16" and 1-3/8" Bearing Set
1 of 7
K08-248-1G 3500lb 5 on 4-1/2" Bolt Pattern Pre-Greased Idler Hub Kit with 1-1/16" and 1-3/8" Bearing Set

The Dexter Axle K08-248-1G pre greased idler hub kit fits 2990lb to 3500lb capacity axles and has a 5 on 4-1/2" bolt pattern. No need to assemble, this hub drum already has the bearings greased with Dexter Axle™ Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combinations and comes with both lubeable style dust cap and standard solid dust cap that are both interchangeable with all E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

Complete pre-greased fully assembled boxed trailer idler hub kit for 1 wheel.

Pre-greased fully assembled kit Includes:

  • 1 - 008-248-05 idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
    • 6-1/4" diameter flange
    • 4-1/8" overall height
    • 1/2"-20 thread pitch lug studs
    • Rated 1750 lbs. capacity per side
  • 1 - 031-031-02 L44649 bearing cone (pre-greased and pre-installed)
    • 1-1/16" (1.063") inner diameter
  • 1 - 031-033-02 L68149 bearing cone (pre-greased and pre-installed)
    • 1-3/8" (1.378") inner diameter
  • 1 - 031-031-01 L44610 outer bearing cup race (pre-installed)
  • 1 - 031-033-01 L68111 inner bearing cup race (pre-installed)
  • 1 - 010-019-00 (171255TB) Grease seal (See Note)
    • 1.719" inner diameter
    • 2.565" outer diameter
  • 1 - 021-041-01 1.98" outer diameter lube style cap
  • 1 - 085-001-00 rubber lube style cap plug
  • 1 - 021-003-00 1.98" outer diameter standard dust cap
  • 5 - 006-080-00 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
  • 1 - 005-023-00 1" d shaped spindle washer
  • 1 - 005-027-00 1" round spindle washer
  • 1 - 006-176-00 1" slotted spindle nut
  • 1 - 019-002-00 cotter pin
  • 1 - 006-191-00 1" hex spindle nut
  • 1 - 006-190-00 d shaped hex nut retainer
  • 1 - 059-831-00 instruction sheet

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

Price$90.99
ID 300-029534
300-029534 3700lb 5 on 4-1/2" Bolt Pattern Oil Bath Idler Hub Kit with 1-1/16" and 1-3/8" Bearing Set
1 of 5
300-029534 3700lb 5 on 4-1/2" Bolt Pattern Oil Bath Idler Hub Kit with 1-1/16" and 1-3/8" Bearing Set

This Complete 300-029534 H1000 OIL BATH idler hub kit fits EZ Loader boat trailers 2005 to present that use a tapered spindle with 2990lb to 3700lb capacity rated axles and has a 5 on 4-1/2" bolt pattern. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands using standard 3500lbs tapered spindles.

Kit includes:

  • 1 - 290-029195 H1000 Oil bath idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
    • 6-1/2" diameter flange
    • 4-1/8" overall height
    • 1/2"-20 thread pitch lug studs
    • Rated 1850 lbs. capacity per side
  • 1 - L44649 bearing
    • 1-1/16" (1.063") inner diameter
  • 1 - L68149 bearing
    • 1-3/8" (1.378") inner diameter
  • 1 - L44610 outer bearing race (pre-installed)
  • 1 - L68111 inner bearing race (pre-installed)
  • 1 - 250-031468 Rubber coated oil seal
    • 1.687" inner diameter
    • 2.565" outer diameter
  • 1 - 250-034388 Aluminum oil bath cap with O-Ring
  • 1 - 034-325-00 Pipe plug
  • 1 - 005-164-00 D-style washer
  • 1 - 006-210-00 Spindle nut
  • 1 - 006-211-00 Spindle nut cotter pin retainer (Cookie Cutter)
  • 5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
  • 1 - Cotter pin

This trailer oil bath idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Please note: EZ Loader suggest using 80-90w Gear Lube in their oil bath hubs.

Price$164.99
« Previous12 Next »