Filter Results
Sort Order
Manufacturer
Home
» All Products
« Previous123456 »
ID 21100
21100 1" to 3/4" Tow Ball Reducer Bushing
1 of 5

Reducer bushing for trailer tow ball

  • Reduces hole size, allowing use of trailer balls with smaller shank diameters
  • Reduces 1" diameter hole to 3/4"
  • Protected by a durable yellow zinc-plated finish
Price$2.99
ID 21200
21200 1-1/4" to 1" Tow Ball Reducer Bushing
1 of 5

Reducer bushing for trailer tow ball

  • Reduces hole size, allowing use of trailer balls with smaller shank diameters
  • Reduces 1-1/4" diameter hole to 1"
  • Protected by a durable yellow zinc-plated finish
Price$2.99
ID 58380
58380 4-Flat 12" Extension Loop
1 of 3
12" Loop extension to extend 4-flat pigtails or can be used as a replacement for both vehicle or trailer side connectors.
  • Splices into existing wiring to provide connections for both vehicle and trailer
  • Looped wire can also be used as a wire extension for an existing connector
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Constructed with bonded 16-gauge wires and durable molded rubber
  • Features 12" of color-coded wire for easier installation
  • Designed for use on vehicles and trailers with two-wire systems
Price$4.99
ID 8520
8520 Combination and Pintle Bolt Kit

Buyers Products Pintle/Combination Hitch Mounting bolt kit fits most standard combination and pintle mounts. 

It includes: 
  • (4) 1/2 in. x 2 in. Grade 8 cap screws 
  • (4) 1/2 in. Grade 8 hex nuts
  • (4) 1/2 in. heavy lock washers
  • (4) /12 in. flat washers
Price$5.99
ID A10-0908
A10-0908 Plastic Wheel Chock with Rope
1 of 2
  • Keep your trailer or RV in place
  • Nylon cord makes it easy to remove chock
  • Integrated grooves grip your tires for added stability
  • Durable, polyethylene construction for strength
  • Measures 7" long x 4-1/4" wide x 5" tall
Price$6.99
ID 12-716
12-716 7-Way Flat Pin to 4-Flat Adapter
1 of 3

This particular adapter is designed to convert a 7-way blade connector to 4-way flat trailer connector and comes with a 4-flat tester. It is the fastest and easiest way to make electrical connections when pulling a trailer that has a different wiring configuration than the vehicle. The rugged construction will offer years of trouble-free service and the compact design allows for convenient storage when not in being used to pull a trailer.

  • Converts 7-Way blade connector to standard 4-Flat connector
  • Circuit tester included with adapter
  • Instant plug in installation
  • Non-corrosive thermo plastic construction
  • Compatible with plastic or metal connectors
  • Compact and easy to store when not in use
  • designed for 12 volt systems
Price$7.99
ID 12-719
12-719 7-Way to 6-Way Adapter Electrical Brakes to Center Pin
1 of 3

This adapter is designed to convert a 7-way blade connector to 6-pin trailer connector with brakes on the center pin. It's the fastest and easiest way to make electrical connections when pulling a trailer that has a different wiring configuration than the vehicle. The rugged construction will offer years of trouble-free service and the compact design allows for convenient storage when not in being used to pull a trailer.

  • Converts 7-Way blade connector to standard 6-Pin connector
  • Designed with Center Pin on 6 Pin to activate electric trailer brakes
  • Quick, easy installation
  • Non corrosive thermo plastic construction
  • Compatible with plastic or metal connectors
  • Compact and easy to store when not in use
  • Designed for 12 volt systems
Price$7.99
ID 58050
58050 72" 4-Flat Vehicle and Trailer Loop
1 of 2

This 4-way flat connector is designed to supply power for tail lights, turn signals and brake lights, as well as a ground connection. It features durable rubber-molded construction and is made with 72" of standard color-coded, bonded loop wire to easily splice into your vehicle's wiring system. It includes both a vehicle end and trailer end and can be cut to splice into existing wiring or left as a loop to serve as a useful extension harness. It is compatible with all 2-wire vehicle systems.

Price$7.99
ID 57040
57040 7-Way Pole Pin to 4-Flat Adapter
1 of 3

This electrical adapter is designed to adapt a 7-way round pin style vehicle socket to fit a 4-way flat trailer plug. It is constructed from quality plastic and requires no splicing.

  • Adapts a 7-way round vehicle socket to fit 4-way flat trailer plugs
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
Price$8.99
ID 82-00-3216
82-00-3216 Tethered Ball Cover for 2-5/16" Ball
1 of 2

Fastway® Tethered Ball Cover for 2-5/16" Ball. Lubing your hitch ball is good. Getting grease all over your pants is not. Don’t waste time trying to get the grease off you and your kids, instead, grab a Fastway® tethered Ball Cover. This ingenious solution will keep grease off your clothes, and it has a handy tether to keep it in place while you are towing your trailer. Let the new Fastway tethered Ball Cover take away some of the hassle and mess of keeping your hitch ball lubed up properly.

Price$8.99
ID 82-01-3221
82-01-3221 Tethered Ball Cover for 2" Ball
1 of 2

Fastway® Tethered Ball Cover for 2" Ball. Lubing your hitch ball is good. Getting grease all over your pants is not. Don’t waste time trying to get the grease off you and your kids, instead, grab a Fastway® tethered Ball Cover. This ingenious solution will keep grease off your clothes, and it has a handy tether to keep it in place while you are towing your trailer. Let the new Fastway tethered Ball Cover take away some of the hassle and mess of keeping your hitch ball lubed up properly.

Price$8.99
ID 12-729
12-729 7-Way to 6-Way Adapter Auxiliary to Center Pin
1 of 3

This adapter is designed to convert a 7-way blade connector to 6-pin trailer connector with auxiliary on the center pin. It's the fastest and easiest way to make electrical connections when pulling a trailer that has a different wiring configuration than the vehicle. The rugged construction will offer years of trouble-free service and the compact design allows for convenient storage when not in being used to pull a trailer.

  • Converts 7-Way blade connector to standard 6-Pin connector
  • Designed with Center Pin on 6-Pin to activate auxiliary circuit
  • Quick, easy installation
  • Non-corrosive thermo plastic construction
  • Compatible with plastic or metal connectors
  • Compact and easy to store when not in use
  • Designed for 12 volt systems
Price$10.99
ID 57250
57250 7-Way Blade Connector to 4 or 5 Way Flat Connector
1 of 3

This adapter allows connection of either 4 or 5-way flat trailer plug to vehicles with 7-way blade receptacles. It is designed for use with boat and utility trailers with certain hydraulic surge brakes and /or backup lights.

  • 7-Way Blade to 5 or 4-Flat Adapter
  • Designed for use with boat and utility trailers
  • For use with hydraulic surge brake reverse lockout solenoids and/or back up lights
  • Compatible with plastic or metal connectors
  • Compact and easy to store when not in use
  • Non corrosive thermo plastic construction
  • Designed for 12 volt systems
Price$10.99
ID 58550
58550 72" 5-Flat Vehicle and Trailer Loop
1 of 3
This 5-way flat connector is designed to supply power for tail lights, turn signals, reverse lights and brake lights, as well as a ground connection. It features durable rubber-molded construction and is made with 72" of standard color-coded, bonded loop wire to easily splice into your vehicle's wiring system. It includes both a vehicle-end and trailer-end connector and can be cut to splice into existing wiring or left as a loop to serve as a useful extension harness. 5-way flat connectors are commonly used on boat trailers with surge brakes.
Price$11.99
ID 12-717
12-717 6-Way Round Pin to 4-Flat Adapter
1 of 3

This adapter is designed to a convert 6-pole round pin vehicle connector to a 4-way flat trailer connector. It's the fastest and easiest way to make electrical connections when pulling a trailer that has a different wiring configuration than the vehicle. The rugged construction will offer years of trouble-free service and the compact design allows for convenient storage when not in being use to pull a trailer.

  • Converts 6-Pin vehicle connector to 4-Flat connector
  • Easiest way to adapt vehicle to trailer when different connectors are involved
  • Compact design
  • Compact design for easy storage
  • Corrosion resistant thermo-form construction
  • Corrosion resistant terminals
  • Rated for 7.5 amps per circuit
Price$12.99
ID 16902
16902 1-Set of Replacement 5th Wheel Pins and Clips
1 of 2

This set of replacement 5th wheel pins and clips is designed to mount 5th wheel legs or a 5th wheel roller on a pair of 5th wheel base rails. Four pins and four clips are included and come with a durable zinc finish. standard 1/2" diameter pins.

Note: Fits 5th wheel legs (except OEM), rollers and 5th wheel rail gooseneck hitches

  • Used to attach a 5th wheel hitch to base rails
  • Fits 5th wheel legs (except OEM), rollers and 5th wheel rail gooseneck hitches
  • Grooved pin allows clip to be inserted in any position
  • Protected by a durable zinc-plated finish
Price$14.99
ID 40001
40001 2K 1-7/8" Tow Ball with 3/4"D X 1-5/8"L Shank
1 of 3
  • Fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW
  • Constructed from high-strength, hot-forged steel
  • Protected by a durable chrome-plated finish
  • Zinc-plated hex nut and helical lock washer for secure mounting
  • Features fine threads for superior holding strength
  • Tested for safety to meet U.S. VESC V-5 specifications

Notes:

  • The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger in diameter than the threaded shank

CURT 1-7/8" trailer balls are constructed from high-strength steel to match the towing power of your class 1 or class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches your coupler size is absolutely essential. At CURT, our trailer balls are engineered to be precisely fitted. When we stamp 1-7/8" into the top of each hitch ball, we actually mean 1-7/8".

This CURT tow ball features a ball capacity of 2,000 lbs. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers and some recreational vehicle haulers (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). As with any trailer, be sure that your towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 1-5/8" shank length, 0" of rise and a nickel-chrome finish to protect against corrosion and wear. Like all CURT trailer balls, our 1-7/8" balls are tested for your safety and meet all U.S. VESC specifications.

Price$14.99
ID 40003
40003 3.5K 2" Tow Ball with 3/4"D X 1-3/4"L Shank
1 of 3
  • Fits 2" couplers and accepts up to 3,500 lbs. GTW
  • Constructed from high-strength, hot-forged steel
  • Protected by a durable chrome-plated finish
  • Zinc-plated hex nut and helical lock washer for secure mounting
  • Features fine threads for superior holding strength
  • Tested for safety to meet U.S. VESC V-5 specifications

Notes:

  • The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger in diameter than the threaded shank

Out of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers such as utility trailers, boat trailers, campers, livestock trailers and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount, and are the ideal choice for most pickup trucks and SUVs (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).

This particular 2" trailer ball offers a ball capacity of 3,500 lbs. It features a 3/4" shank diameter, a 1-3/4" shank length, 0" of rise and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torqueing. To give you peace of mind while towing to that next destination, we also carefully test our trailer balls and ensure that each one meets U.S. VESC specifications.

Price$14.99
ID 17111
17111 Weight Distribution Replacement Chain Kit
1 of 5

This replacement spring bar chain kit is designed to fit a variety of weight distribution hitch brands, including trunnion bar and round bar. The chains help attach the spring bars to the trailer, using hookup brackets, and provide easy spring bar tension adjustment. This kit includes two complete spring bar chains with two U-bolts, four lock nuts and four washers.

  • Compatible with all weight distribution hitch spring bars (except Curt TruTrack)
  • Zinc Finish
  • Easily attaches to spring bars with the included U-bolts
  • Multiple chain links allow for flexible adjustment of tension
  • Includes four 3/8" lock-nuts, four 3/8" flat washers, two chains and two U-bolts

Note: Spring bars and hookup brackets are not included

Price$16.99
ID WC1467A
WC1467A Rubber Wheel Chock
  • Reinforced rubber design
  • Resistant to sun, salt, oil, and acid
Price$17.99
« Previous123456 »