Axle Teknology import 17-100 pre greased idler hub kit fits 1250lb to 2000lb capacity axles and has a 4 on 4" bolt pattern. No need to assemble, this idler hub already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Compatible all with BTR (1-1/16" bearing combination) and comes with both lubeable style dust cap and standard solid dust cap that are both interchangeable with all E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands. This hub has a 5-1/2" diameter flange for use with 8", 10", and 12" trailer wheels.

Complete pre-greased fully assembled boxed trailer idler hub kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - Idler hub with 4 on 4" lug bolt pattern (see image on how to measure lug spacing)
  • 5-1/2" diameter flange
  • 1/2"-20 thread pitch lug studs
  • Rated 1000 lbs. capacity per side
• 2 - L44649 bearing cone (pre-greased and pre-installed)
  • 1-1/16" (1.063") inner diameter
• 2 - L44610 outer bearing cup race (pre-installed)
• 1 - 10-9 Grease seal (See Note)
  • 1.500" inner diameter
  • 1.987" outer diameter
• 1 - 1.98" outer diameter lube style cap and rubber plug
• 1 - 1.98" outer diameter standard dust cap
• 4 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

For use with 8", 10" and 12" wheels only

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.250" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#12192TB

Axle Teknology import 17-150 pre greased idler hub kit fits 1250lb to 2200lb capacity axles and has a 5 on 4-1/2" bolt pattern. No need to assemble, this idler hub already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Compatible all with BTR (1-1/16" bearing combination) and comes with both lubeable style dust cap and standard solid dust cap that are both interchangeable with all E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands. This hub has a 5-1/2" diameter small flange for use with 8", 10", and 12" trailer wheels.

Complete pre-greased fully assembled boxed trailer idler hub kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - Idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • 5-1/2" diameter small flange
  • 1/2"-20 thread pitch lug studs
  • Rated 1100 lbs. capacity per side
• 2 - L44649 bearing cone (pre-greased and pre-installed)
  • 1-1/16" (1.063") inner diameter
• 2 - L44610 outer bearing cup race (pre-installed)
• 1 - 10-9 Grease seal (See Note)
  • 1.500" inner diameter
  • 1.987" outer diameter
• 1 - 1.98" outer diameter lube style cap and rubber plug
• 1 - 1.98" outer diameter standard dust cap
• 5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

For use with 8", 10" and 12" wheels only

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.250" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#12192TB

Axle Teknology import 17-165 pre greased idler hub kit fits 1250lb to 2200lb capacity axles and has a 5 on 4-1/2" bolt pattern. No need to assemble, this idler hub already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Compatible all with BTR (1-1/16" bearing combination) and comes with both lubeable style dust cap and standard solid dust cap that are both interchangeable with all E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands. This hub has a 6-1/2" diameter flange for use with 13", 14", and 15" trailer wheels.

Complete pre-greased fully assembled boxed trailer idler hub kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - Idler large flange hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • 6-1/2" diameter large flange
  • 1/2"-20 thread pitch lug studs
  • Rated 1100 lbs. capacity per side
• 2 - L44649 bearing cone (pre-greased and pre-installed)
  • 1-1/16" (1.063") inner diameter
• 2 - L44610 outer bearing cup race (pre-installed)
• 1 - 10-9 Grease seal (See Note)
  • 1.500" inner diameter
  • 1.987" outer diameter
• 1 - 1.98" outer diameter lube style cap and rubber plug
• 1 - 1.98" outer diameter standard dust cap
• 5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

For use with 13", 14" and 15" wheels only

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.250" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#12192TB

Axle Teknology import 17-110 pre greased idler hub kit fits 2990lb to 3500lb capacity axles and has a 5 on 4-1/2" bolt pattern. No need to assemble, this idler hub already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combinations and comes with both lubeable style dust cap and standard solid dust cap that are both interchangeable with all E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

Complete pre-greased fully assembled boxed trailer idler hub kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - Idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • 6-1/4" diameter large flange
  • 4-1/8" overall height
  • 1/2"-20 thread pitch lug studs
  • Rated 1750 lbs. capacity per side
• 1 - L44649 bearing cone (pre-greased and pre-installed)
  • 1-1/16" (1.063") inner diameter
• 1 - L68149 bearing
  • 1-3/8" (1.378") inner diameter
• 1 - L44610 outer bearing cup race (pre-installed)
• 1 - L68111 inner bearing race (pre-installed)
• 1 - 171255TB Grease seal (See Note)
  • 1.719" inner diameter
  • 2.565" outer diameter
• 1 - 1.98" outer diameter lube style cap and rubber plug
• 1 - 1.98" outer diameter standard dust cap
• 5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

The 19-140 pre greased 7" hub and drum kit has a 5 on 4-1/2" bolt pattern and fits 2200lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-1/16" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 7" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - Integrated hub-and-drum with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • Works with 7" x 1-1/4" electric and 7" x 1-3/4" hydraulic trailer brakes
  • 1/2"-20 thread pitch lug studs
  • Rated 1100 lbs. capacity per side
• 2- L44649 bearing cones (pre-greased and pre-installed)
  • 1-1/16" (1.063") inner diameter
• 2 - L44610 outer bearing cup races (pre-installed)
• 1 - 12192TB Grease seal
  • 1.249" inner diameter
  • 1.983" outer diameter
• 1 - 1.98" outer diameter lube style cap and rubber plug
• 1 - 1.98" outer diameter standard dust cap
• 5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

The 19-100 pre greased 10" hub and drum kit has a 5 on 4-1/2" bolt pattern and fits 3500lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 10" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - Integrated hub-and-drum with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • Works with 10" x 2-1/4" hydraulic and electric trailer brakes
  • 1/2"-20 thread pitch lug studs
  • Rated 1750 lbs. capacity per side
• 1 - L44649 bearing cone (pre-greased and pre-installed)
  • 1-1/16" (1.063") inner diameter
• 1 - L68149 bearing cone (pre-greased and pre-installed)
  • 1-3/8" (1.378") inner diameter
• 1 - L44610 outer bearing cup race (pre-installed)
• 1 - L68111 inner bearing cup race (pre-installed)
• 1 - 171255TB Grease seal (See Note)
  • 1.719" inner diameter
  • 2.565" outer diameter
• 1 - 1.98" outer diameter lube style cap and rubber plug
• 1 - 1.98" outer diameter standard dust cap
• 5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

The 19-125 pre greased 12" hub and drum kit has a 6 on 5-1/2" bolt pattern and fits 5000lb and 6000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • Works with 12" x 2" hydraulic and electric trailer brakes
  • 1/2"-20 thread pitch lug studs
  • Rated 3000 lbs. capacity per side
• 1 - 15123 bearing cone (pre-greased and pre-installed)
  • 1-1/4" (1.250") inner diameter
• 1 - 25580 bearing cone (pre-greased and pre-installed)
  • 1-3/4" (1.750") inner diameter
• 1 - 15245 outer bearing cup race (pre-installed)
• 1 - 25520 inner bearing cup race (pre-installed)
• 1 - 22333TB Grease seal (See Note)
  • 2.250" inner diameter
  • 3.376" outer diameter
• 1 - 2.44" outer diameter lube style cap and rubber plug
• 1 - 2.44" outer diameter standard dust cap
• 6 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Additional Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048 which is the same 1.250" inner diameter that this drum kit 15123 bearing uses. the difference is the outer bore of the drum but all the parts in this kit will still work on the axle beam.

The 19-130 pre greased 12" hub and drum kit has a 8 on 6-1/2" bolt pattern and fits 7000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • Works with 12" x 2" hydraulic and electric trailer brakes
  • 1/2"-20 thread pitch lug studs
  • Rated 3500 lbs. capacity per side
• 1 - 14125A bearing cone (pre-greased and pre-installed)
  • 1-1/4" (1.250") inner diameter
• 1 - 25580 bearing cone (pre-greased and pre-installed)
  • 1-3/4" (1.750") inner diameter
• 1 - 14276 outer bearing cup race (pre-installed)
• 1 - 25520 inner bearing cup race (pre-installed)
• 1 - 22333TB Grease seal (See Note)
  • 2.250" inner diameter
  • 3.376" outer diameter
• 1 - 2.72" outer diameter lube style cap and rubber plug
• 1 - 2.72" outer diameter standard dust cap
• 8 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

The 19-135 pre greased 12" hub and drum kit has a 8 on 6-1/2" bolt pattern and fits 7000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • Works with 12" x 2" hydraulic and electric trailer brakes
  • 9/16"-18 thread pitch lug studs
  • Rated 3500 lbs. capacity per side
• 1 - 14125A bearing cone (pre-greased and pre-installed)
  • 1-1/4" (1.250") inner diameter
• 1 - 25580 bearing cone (pre-greased and pre-installed)
  • 1-3/4" (1.750") inner diameter
• 1 - 14276 outer bearing cup race (pre-installed)
• 1 - 25520 inner bearing cup race (pre-installed)
• 1 - 22333TB Grease seal (See Note)
  • 2.250" inner diameter
  • 3.376" outer diameter
• 1 - 2.72" outer diameter lube style cap and rubber plug
• 1 - 2.72" outer diameter standard dust cap
• 8 - 9/16"-18 thread pitch zinc plated 60 degree coned lug nuts

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB