Clear lens LED taillight - Illuminates RED when lit. This unit is a surface mount light and comes with a Black ABS Plastic base. OEM replacement for Wells Cargo and Haulmark trailers

This particular connector is designed to be a perfect OEM replacement, providing a 4-way flat socket and 7-way RV blade socket to accept either trailer plug type. It features a USCAR base to connect to any standard USCAR plug (see application info to verify fitment with your vehicle). Once plugged into the USCAR socket, it provides a connection for the taillights, turn signals, brake lights, backup or reverse lights, electric trailer brakes and a 12-volt battery. It also provides a connection for the ground wire.

This trailer wiring connector is built to withstand the elements. It is constructed from durable black molded plastic to be impervious to rust, and it features spring-loaded dust caps to keep out rain, salt, grime and dirt when the connectors are not in use.

• Plugs into any USCAR socket to provide 4-way and 7-way trailer wiring connectors
• Simple plug-and-play design eliminates the need for cutting or splicing
• Easy, snap-in installation
• 4-way flat output connects tail lights, brake lights and turn signals
• 7-way RV blade socket adds reverse lights, electric brakes and auxiliary power
• Rubber gasket to keep moisture and elements out
• Spring-loaded dust covers keep connectors clean when not in use
• Pre-greased terminals for a reliable connection

This replacement jack foot is fits all industry standard 7000 lbs. and 8000 lbs. direct-weld square jacks. The 2" x 2" square drop leg fits into the jack and allows for stable raising and lowering of the trailer tongue adding extra adjustment.

• Tubing dimensions: 2" x 2"
• Footplate dimensions: 8" long x 6" wide
• Distance between adjustment pin holes center to center: 3-3/8"
• Overall height: 17-3/4"

Jack drop leg interchange is same as:
Bulldog #500270
Buyers Products #3006073A
RAM #TJD-7000-FT

• Fits 2-5/16" couplers and accepts up to 20,000 lbs. GTW
• Constructed from high-strength, hot-forged steel
• Heat-treated for optimum wear resistance
• Protected by a durable chrome-plated finish
• Zinc-plated hex nut and helical lock washer for secure mounting
• Features fine threads for superior holding strength
• Tested for safety to meet U.S. VESC V-5 specifications

• Black powder coated steel construction
• Rated at 300 lb. tongue capacity; 3,000 lbs. M.G.T.W. (not to exceed hitch capacity)
• 1/2" hitch pin included

This special trailer light adapter is designed to plug into an existing 7-way RV blade socket to allow the vehicle to recognize LED trailer lights. It features built-in resistors for vehicles with computers that don't recognize LED lights and enables them to be compatible with trailers that have them. It is not intended to be used as a wiring extension. This 7-way RV blade adapter requires no splicing and is a custom wiring option for certain years of the Porsche Cayenne, Audi Q7 Quattro or Volkswagen Touareg or VW Colorado

22198 1.98" Chrome Bearing Protector with Bra - Sold as a pair

Why use a Bearing Protector?

Boat trailer hubs get warm while traveling to the ramp.  Warm hubs backed into cool water during launching are suddenly cooled which contracts any air inside the hub creating a vacuum.  The vacuum pulls water and road grit inside the hub contaminating the grease.  The contamination causes corrosion and rapid wear. Perfectly good bearings can be ruined in less than one season.

Bearing Protectors corrects this problem by filling the entire hub with grease. Most air that is trapped inside the hub will be expelled by the Bearing Protector pressure relief feature. Once the hub is full, the spring loaded piston in the Bearing Protector exerts a slight pressure to the grease inside the hub.  With the pressure inside the hub slightly higher than the pressure outside the hub, water and grit cannot be drawn inside.

An automatic pressure relief feature prevents over-filling the hub which would damage seals.

• Fits hubs with an inner diameter of 1.98"
• Chrome Plated

Sold as a pair