parts and accessories at Freeway Trailer Sales

ID 008-213-09

1 of 5

008-213-09 6000lb 6 on 5-1/2" Bolt Pattern Idler Hub

Dexter 8-213-9 idler hub fits 5200lb to 6000lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible all with 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

1 - Idler hub with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

4-1/2" overall height
1/2"-20 thread pitch lug studs
1 - 15245 outer bearing race (pre-installed)
1 - 25520 inner bearing race (pre-installed)
has a 2.44" bore diameter
Rated 3000 lbs. capacity per side

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$59.99

ID 2024013263

1 of 6

2024013263 3500lb 5 on 4-1/2" Bolt Pattern Pre-Greased Idler Hub Kit with 1-1/16" and 1-3/8" Bearing Set

The Lippert 2024013263 pre greased idler hub kit has a 5 on 4-1/2" bolt pattern and fits 3500lb capacity axles. No need to assemble, this trailer hub already has the bearings greased with a Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with lubeable style dust cap that is compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer idler hub kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - K-122461 idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- 1/2"-20 thread pitch lug studs
- Rated 1750 lbs. capacity per side
1 - L44649 bearing cone (pre-greased and pre-installed)
- 1-1/16" (1.063") inner diameter
1 - L68149 bearing cone (pre-greased and pre-installed)
- 1-3/8" (1.378") inner diameter
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
1 - 171255TB Grease seal (See Note)
- 1.719" inner diameter
- 2.565" outer diameter
1 - 1.98" outer diameter lube style cap
1 - Rubber lube style cap plug
5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 1" round spindle washer (1.03" ID x 1.68" OD)
1 - 1" 6 slotted spindle nut
1 - 1-3/4" cotter pin

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

Price$59.99

ID BRK12LHSA

1 of 3

BRK12LHSA 12" X 2" 5200LB-6000LB-7000LB Left Hand Self Adjusting Electric Brake Assembly

This is a LEFT SIDE SELF ADJUSTING brake assembly. Reduce precious time and aggravation on difficult brake repairs by using this easy to install complete brake assembly kit. These CSA certified kits provide durability, and reliability in braking performance. Used on 5200LB, 6000Lb and 7000LB axles. Sold individually.

Used on drivers side of trailer

Identified by black wire on the magnet

Self-adjusting brakes eliminates the needs for periodic manual adjustments.

Better Braking – Automotive grade friction material molded to brake shoes.
Linings are fully bonded to shoes for long life and more braking torque.
Cut linings instead of snapped offers less chance of cracking and crumbling.
E-coated backing plate resists wear and corrosion.
12" x 2" rated at 7,000 lb. capacity - per axle.
Left Hand.

Direct interchange for the following brands and part numbers:

HuskyTow - 32290

TRP-TruRyde - BK-12E-01SA

Ultra-Fab - 48-979214

Ultra-Fab - 48-979254

Price$59.99

ID BRK12RHSA

1 of 3

BRK12RHSA 12" X 2" 5200LB-6000LB-7000LB Right Hand Self Adjusting Electric Brake Assembly

This is a RIGHT SIDE SELF ADJUSTING brake assembly. Reduce precious time and aggravation on difficult brake repairs by using this easy to install complete brake assembly kit. These CSA certified kits provide durability, and reliability in braking performance. Used on 5200LB, 6000Lb and 7000LB axles. Sold individually.

Used on passenger side of trailer

Identified by black wire on the magnet

Self-adjusting brakes eliminates the needs for periodic manual adjustments.

Better Braking – Automotive grade friction material molded to brake shoes.
Linings are fully bonded to shoes for long life and more braking torque.
Cut linings instead of snapped offers less chance of cracking and crumbling.
E-coated backing plate resists wear and corrosion.
12" x 2" rated at 7,000 lb. capacity - per axle.
Right Hand.

Direct interchange for the following brands and part numbers:

HuskyTow - 32291

TRP-TruRyde - BK-12E-02SA

Ultra-Fab - 48-979215

Ultra-Fab - 48-979255

Price$59.99

ID MJ-1200B

1 of 8

MJ-1200B 1200 lb Sidewind Bolt-on Marine Swivel Jack with 6-inch Wheel

RAM Sidewind bolt-on swing up swivel marine trailer jack. Easily bolts around trailer frames that are 2", 3" 4" or 5" tall. Rated for 1,200lb supporting and lift capacity weight limits. Includes swivel wheel for easy maneuvering. Ideal for use with boat, sport craft, snowmobile and other recreational trailers.

Bolt-on swivel jack is typically used on marine trailers. Jack has a zinc coating to help resist corrosion. Jack has spring loaded pin to make the swivel process quick and easy. When trailer is connected to tow vehicle jack can be quickly swiveled up and out of the way for traveling. Then when the trailer needs to be disconnected the jack can just as easily swiveled down to lift trailer.

1,200lb Support/Lift Capacity
Large 1/2″ pull pin to activate the swivel mechanism
Large grooved comfort handle to operate the jack
Four bolt pin through bracket design with large diamond shaped washer for side load support
Durable clear zinc finish for added corrosion resistance
Bolt on hardware included to mount to 2", 3" 4" or 5" tall trailer frames
Single 6″ poly caster wheel
Leg extends 10"

Dimensions see image

(A) Retracted = 12-1/2"
(B) Extended = 23-1/2"
(C) Clearance = 10-1/2"

Price$59.99

ID TJP-2001S-B

1 of 8

TJP-2001S-B 3000 lb Weld-on Sidewind Pipe Mount Swivel Jack

RAM Sidewind pipe mount swivel trailer tongue jack comes with the mating pipe bracket for weld-on applications to side of trailer frame. Jack is ideal for use with ag, industrial, commercial, recreational, and many other types of utility trailers. Features a universal weld on pipe mounting base so if you are just replacing your tongue jack, you would not need to weld on the new bracket. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits.

3,000lb Support Capacity / 2,000lb Lift Capacity
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer tube
Clear zinc finish on inner tube and foot
9/16″ pin and lanyard assembly affixed to the jack to activate the swivel mechanism
Includes a 2″ raw round weld on mating pipe
Grease zerk for easy greasing of jack
Deep seated snap ring for side load support and raw weld on bracket
3-3/4″ x 7-1/2″ welded on durable zinc bottom foot for better stability
Leg extends 11-1/4"

Dimensions see image

(A) Retracted = 10-3/4"
(B) Extended = 21-1/4"
(C) Clearance = 6-1/4"

Price$59.99

ID TJP-5002-B

1 of 8

TJP-5002-B 5000 lb Weld-on Topwind Pipe Mount Swivel Jack

RAM Topwind pipe mount swivel trailer tongue jack comes with the mating pipe bracket for weld-on applications to side of trailer frame. Jack is ideal for use with ag, industrial, commercial, recreational, and many other types of utility trailers. Features a universal weld on pipe mounting base so if you are just replacing your tongue jack, you would not need to weld on the new bracket. Rated for 3,000lb capacity lift and 5,000lb capacity supporting weight limits.

5,000lb Support Capacity / 3,000lb Lift Capacity
Comfortable claw knob handle to operate the jack
Durable exterior grade black finish on outer tube
Clear zinc finish on inner tube and foot
9/16″ pin and lanyard assembly affixed to the jack to activate the swivel mechanism
Includes a 2″ raw round weld on mating pipe
Grease zerk for easy greasing of jack
Deep seated snap ring for side load support and raw weld on bracket
3-3/4″ x 7-1/2″ welded on durable zinc bottom foot for better stability
Leg extends 15"

Dimensions see image

(A) Retracted = 15"
(B) Extended = 31-1/4"
(C) Clearance = 5-3/4"

Price$59.99

ID TJP-5002S-B

1 of 8

TJP-5002S-B 5000 lb Weld-on Sidewind Pipe Mount Swivel Jack

RAM Sidewind pipe mount swivel trailer tongue jack comes with the mating pipe bracket for weld-on applications to side of trailer frame. Jack is ideal for use with ag, industrial, commercial, recreational, and many other types of utility trailers. Features a universal weld on pipe mounting base so if you are just replacing your tongue jack, you would not need to weld on the new bracket. Rated for 3,000lb capacity lift and 5,000lb capacity supporting weight limits.

5,000lb Support Capacity / 3,000lb Lift Capacity
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer tube
Clear zinc finish on inner tube and foot
5/8″ pin and lanyard assembly affixed to the jack to activate the swivel mechanism
Includes a 2″ raw round weld on mating pipe
Grease zerk for easy greasing of jack
Deep seated snap ring for side load support and raw weld on bracket
3-3/4″ x 7-1/2″ welded on durable zinc bottom foot for better stability
Leg extends 14-1/4"

Dimensions see image

(A) Retracted = 15-1/2"
(B) Extended = 29-3/4"
(C) Clearance = 6-1/2"

Price$59.99

ID TL5RK

1 of 9

TL5RK Complete Standard Trailer Light Kit for under 80" wide Trailers

Submersible stud-mount stop/turn/tail light kit for under 80" applications. Grounds through mounting studs. Mounts on 2" centers. Features screw-on, replaceable lens and easy to change replaceable bulb. Shock proof socket guarantees long bulb life. All-weather molded plastic housing and durable lens protect against corrosion.

Includes the following components:

1 - 6-function: stop, turn, tail, rear reflex, side marker, and side reflex.
1 - 7-function stop, turn, tail, rear reflex, side marker, and side reflex plus license illuminator.
Includes gaskets for weather-tight seal.
1 - Basic plastic license plate holder
2 - Amber single stud mounted marker lights
1 - 25' Wishbone style trailer wiring harness and mounting hardware.

Price$59.99