Dexter replacement rubber plug for most 6K and up Dexter oil bath plastic caps.

Fits the following oil bath caps

• 021-035-00
• 021-036-00
• 021-040-00

This D-shaped washer fits 1" threaded trailer spindles with a flat spot. 2" Outside diameter, 1" Inside diameter. 3/32" Thick. Commonly used on 5,200-7,000 lb. axles. Commonly used UFP and other marine trailer axles.

7/8" Self Locking Nut used on center rocker bolt on 7/8" slipper suspension bolt.

3.5" x 9/16-18 Suspension Bolt

Dexter U-bolt for 3500-LB capacity axles with 2-3/8" diameter round tube axles. U-bolt diameter is 1/2" x 2-3/8" inner Width x 5-1/2"" inside crown to end of thread Length

Dexter axle tie plate used for mounting 2000 lb Axles

Replacement oil fill plug for the threaded screw-on oil bath cap for 6 and 8 lug oil bath drums. Note: Dexter does not use this on all applications.

Dexter Axle E-Z Lube Spindle Nut Castle Style - 1" inner diameter

This trailer hub grease seal is a double lip seal with an inner diameter of 1.500" and an outer diameter of 1.987" with a thickness of 0.25". Grease seals are used to keep the water and road grime out and the grease in. This seal is most commonly used on up to 2000 pound capacity axles with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles.

This grease seal works on all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

• Inner Diameter = 1.500"
• Outer Diameter = 1.987"
• Thickness = 0.25"

Industry standard grease seal cross reference numbers

• Transcom - 15192TB
• NOK - AR2266FO
• Chicago Rawhide - 14840
• Tekonsha - 5603
• Dexter Axle - 10-9
• National Seal - 474276
• TruRyde - GS-1500DL
• PHLE - AD2267N

This is a push in grease cap with an OD of 2.45" and is 1.34" high. This grease cap is for 12 x 2" hubs with a 4, 5, or 6 lug bolt pattern.

OD - 2.45"

This is a push in grease cap with an OD of 1.98" and is 1.20" high. This grease cap is for 10 x 2.25" hubs with a 4, or 5 lug bolt pattern

OD - 1.98"

This is a push in grease cap with an OD of 2.72" and is 1.39" high. This grease cap is for 12 x 2" hubs with an 8 lug bolt pattern.

OD - 2.72"

This is a galvanized lube style grease cap with an outer diameter of 1.98" and a height of 1.40". This cap fits all industry standard 1,000lb 2,000lb, and 3,500lb capacity axle hubs and brake drum applications.

Requires rubber inspection plug 085-001-00 (sold separately)

This axle dust cap works on all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.