Filter Results
Sort Order
Axle Specifications
Tire Specifications
Manufacturer

Shop for replacement Dexter Axle trailer axles and repair parts for all industry standard brands including Dexter Axle, LCI Lippert Components, and Rockwell American covering everything from axle beams and complete axle packages, manual and self adjusting electric trailer brake options from 2000LB capacity thru 7000LB capacity per beam, and marine hydraulic surge disk and drum brakes for boat trailers, U-bolt mounting hardware, hubs and drums, bearings, grease seals and axle dust covers from standard to bearing buddy protectors.

Home
» Axle Components
» All Products
« 12345678910... »
ID EQ-R2
EQ-R2 Center Equalizer Straight
1 of 2
EQ-R2 Center Equalizer Straight

Center Equalizer Straight Please refer to image 2 for measurement locations.


Measurements:
  • A = 5 1/2"
  • B = 2 3/4"
  • C = 9/16"
  • D = 9/16"
  • E = Not Applicable
Price$14.99
ID 021-035-00
021-035-00 Dexter Threaded Oil Bath Cap
021-035-00 Dexter Threaded Oil Bath Cap

This is a screw in grease cap with an OD of 2 7/8" - 12 thread. This grease cap is for 8 lug 6 to 8k axles and Dexter 9k (prior to 10/89)

OD - 2 7/8" - 12 Thread

Parts needed with this grease cap

  • O-Ring - 010-045-00
  • Rubber Plug - 046-032-00

There is a hybrid 8K axle this does not fit - please verify bore size and thread pitch
Price$15.99
ID 290-001669
290-001669 5/8"-11 x 4-1/2" Bolt for C-Type Equalizer
290-001669 5/8"-11 x 4-1/2" Bolt for C-Type Equalizer

Bolt for C-Type equalizer typically used on boat trailers with hook end suspension springs. Bolt is 5/8"-11 x 4-1/2" long

Price$15.99
ID 250-015208
250-015208 Double Lip Grease Seal
250-015208 Double Lip Grease Seal
This trailer hub grease seal is a premium double lip rubber seal with an inner diameter of 1.249" and an outer diameter of 1.983" with a thickness of 0.408". Grease seals are used to keep the water and road grime out and the grease in. This seal is most commonly used on up to 2100 pound capacity EZ Loader axles with 5 lug BT150A idler hubs and other marine axles.

Inner Diameter = 1.249"
Outer Diameter = 1.983"
Thickness = 0.408"



Price$16.99
ID 250-020844
250-020844 Double Lip Grease Seal
1 of 2
250-020844 Double Lip Grease Seal
This trailer hub grease seal is a premium double lip rubber seal with an inner diameter of 2.125" and an outer diameter of 3.376" with a thickness of 0.433". Grease seals are used to keep the water and road grime out and the grease in. This seal is most commonly used on 5200 to 6000 pound capacity EZ Loader axles with 6 lug BT150A idler hubs and other marine axles.

Inner Diameter = 2.125"
Outer Diameter = 3.376"
Thickness = 0.433"

Price$16.99
ID 250-031468
250-031468 Double Lip Grease Seal
1 of 2
250-031468 Double Lip Grease Seal
This trailer hub grease seal is a premium double lip rubber seal with an inner diameter of 1.68" and an outer diameter of 2.57" with a thickness of 0.433". Grease seals are used to keep the water and road grime out and the grease in. This seal is most commonly used on up to 3700 pound capacity EZ Loader axles with 5 lug BT150A idler hubs and other marine axles.

Inner Diameter = 1.68"
Outer Diameter = 2.57"

Price$16.99
ID 007-001-00
007-001-00 7/8" Equalizer Rocker Bolt
007-001-00 7/8" Equalizer Rocker Bolt

Center Bolt for Slipper suspension hanger 7/8" x 4 1/2"

Price$18.99
ID 010-063-00
010-063-00 Unitized Oil Bath Seal
010-063-00 Unitized Oil Bath Seal
Unitized oil seal for 5200-8000-LB capacity axle beams with Oil bath drums.

Inner Diameter = 2.250"
Outer Diameter = 3.3760"
Thickness = 0.50"
Price$19.99
ID 028-005-00
028-005-00 Front Spring Hanger
028-005-00 Front Spring Hanger

Front Spring Hanger for use with 1 3/4" wide springs. from outside top to center hole is 3 1/4". Uses standard 9/16" suspension bolt.

Price$19.99
ID 25580
25580 Bearing cone only
1 of 2
25580 Bearing cone only

Tapered wheel bearing. Inner diameter is 1.750" 

Works with trailer wheel bearing race 25520

This wheel bearing rides on the race that is installed in trailer hubs and drums and is found in all industry standard trailer axles with 5200, 6000, and 7000 pound capacity Dexter, Lippert, Rockwell American axles.

Sold Individually
Bearing not included

Price$19.99
ID 013-104-02
013-104-02 Short Equalizer
1 of 2
013-104-02 Short Equalizer

Equalizer short rise A-frame style. Please refer to image 2 for measurement locations.


Measurements:
  • A = 5 3/4"
  • B = 2 3/4"
  • C = 9/16"
  • D = 9/16"
  • E = 2"
Price$20.99
ID 013-122-02
013-122-02 Long Equalizer
1 of 2
013-122-02 Long Equalizer

Equilizer long rise A-frame style. Please refer to image 2 for measurement locations.


Measurements:
  • A = 7 3/4"
  • B = 3 7/8"
  • C = 9/16"
  • D = 9/16"
  • E = 2 7/8"
Price$20.99
ID 30818
30818 Brake Magnet for 10" Electric Brakes
30818 Brake Magnet for 10" Electric Brakes

Fits Standard 10 x 2-1/4" brake.

  • (1) Retainer
  • (1) Magnet Assembly (green wire)
  • (1) Spring
  • (1) Instruction Sheet

Fits all standard 10" x 2-1/4" electric brakes from Lippert, Dexter axle, Husky Tow, TRP, AP Products and more

Price$20.99
ID EQ-E1
EQ-E1 Long Equalizer
1 of 2
EQ-E1 Long Equalizer

Equalizer long rise A-frame style. Please refer to image 2 for measurement locations.


Measurements:
  • A = 7 3/4"
  • B = 3 7/8"
  • C = 9/16"
  • D = 9/16"
  • E = 2 7/8"
Price$20.99
ID UBK-175
UBK-175 Axle U-Bolt and Tie Plate Kit for 2000-LB Axles
UBK-175 Axle U-Bolt and Tie Plate Kit for 2000-LB Axles

Axle U-bolt mounting kit for 2000-LB capacity 1-3/4" wide round tube axles. U-bolt diameter is 3/8" x 1-3/4" inner Width x 4-1/4"" inside crown to end of thread Length


Kit Includes: 

  • (2) Tie-Plates
  • (4) round u-bolts
  • (8) nuts


Price$20.99
ID 250-031580
250-031580 Rubber Equalizer Bushing
250-031580 Rubber Equalizer Bushing

Used in multi-axle suspensions which accommodates C-Hook style leaf springs. (Takes 5/8" bolt #290-001669 Sold Separately)

Price$24.99
ID 16270
16270 1.78" Chrome Bearing Protector with Bra Set
16270 1.78" Chrome Bearing Protector with Bra Set

16270 1.78" Chrome Bearing Protector with Bra - Sold as a pair

Why use a Bearing Protector?

Boat trailer hubs get warm while traveling to the ramp. Warm hubs backed into cool water during launching are suddenly cooled which contracts any air inside the hub creating a vacuum. The vacuum pulls water and road grit inside the hub contaminating the grease. The contamination causes corrosion and rapid wear. Perfectly good bearings can be ruined in less than one season.

Bearing Protectors corrects this problem by filling the entire hub with grease. Most air that is trapped inside the hub will be expelled by the Bearing Protector pressure relief feature. Once the hub is full, the spring loaded piston in the Bearing Protector exerts a slight pressure to the grease inside the hub. With the pressure inside the hub slightly higher than the pressure outside the hub, water and grit cannot be drawn inside.

An automatic pressure relief feature prevents over-filling the hub which would damage seals.

  • Fits hubs with an inner diameter of 1.78"
  • Chrome Plated

Sold as a pair

Price$25.99
ID 16271
16271 1.98" Chrome Bearing Protector with Bra Set
16271 1.98" Chrome Bearing Protector with Bra Set

16271 1.98" Chrome Bearing Protector with Bra - Sold as a pair

Why use a Bearing Protector?

Boat trailer hubs get warm while traveling to the ramp.  Warm hubs backed into cool water during launching are suddenly cooled which contracts any air inside the hub creating a vacuum.  The vacuum pulls water and road grit inside the hub contaminating the grease.  The contamination causes corrosion and rapid wear. Perfectly good bearings can be ruined in less than one season.

Bearing Protectors corrects this problem by filling the entire hub with grease. Most air that is trapped inside the hub will be expelled by the Bearing Protector pressure relief feature. Once the hub is full, the spring loaded piston in the Bearing Protector exerts a slight pressure to the grease inside the hub.  With the pressure inside the hub slightly higher than the pressure outside the hub, water and grit cannot be drawn inside.

An automatic pressure relief feature prevents over-filling the hub which would damage seals.

  • Fits hubs with an inner diameter of 1.98"
  • Chrome Plated

Sold as a pair

Price$25.99
ID 013-010-00
013-010-00 Equalizer 4" High Rise
1 of 2
013-010-00 Equalizer 4" High Rise

Equalizer 4" High Rise A-frame style. Please refer to image 2 for measurement locations.


Measurements:
  • A = 6 1/16"
  • B = 3 1/4"
  • C = 9/16"
  • D = 9/16"
  • E = 4"
Price$26.99
ID 029-031-00
029-031-00 Center Suspension Hanger
029-031-00 Center Suspension Hanger
Center Suspension Hanger. Commonly used with 1 3/4" wide eye to eye style leaf spring equalizer on tandem and triple axle trailers. From outside top to center hole is 3 5/8". Uses standard 9/16" suspension mounting bolt.
Price$26.99
« 12345678910... »