Trailer Axles and Axle Repair Parts at Freeway Trailer Sales

ID 008-248-10

1 of 5

008-248-10 3500lb 5 on 4-3/4" Bolt Pattern Idler Hub

Dexter 8-248-10 idler hub fits 2990lb to 3500lb capacity axles and has a 5 on 4-3/4" bolt pattern. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

1 - Idler hub with 5 on 4-3/4" lug bolt pattern (see image on how to measure lug spacing)

4-1/4" overall height
1/2"-20 thread pitch lug studs
1 - L44610 outer bearing race (pre-installed)
1 - L68111 inner bearing race (pre-installed)
has a 1.98" bore diameter
Rated 1750 lbs. capacity per side

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$58.99

ID 008-213-09

1 of 5

008-213-09 6000lb 6 on 5-1/2" Bolt Pattern Idler Hub

Dexter 8-213-9 idler hub fits 5200lb to 6000lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible all with 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

1 - Idler hub with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

4-1/2" overall height
1/2"-20 thread pitch lug studs
1 - 15245 outer bearing race (pre-installed)
1 - 25520 inner bearing race (pre-installed)
has a 2.44" bore diameter
Rated 3000 lbs. capacity per side

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$59.99

ID 2024013263

1 of 6

2024013263 3500lb 5 on 4-1/2" Bolt Pattern Pre-Greased Idler Hub Kit with 1-1/16" and 1-3/8" Bearing Set

The Lippert 2024013263 pre greased idler hub kit has a 5 on 4-1/2" bolt pattern and fits 3500lb capacity axles. No need to assemble, this trailer hub already has the bearings greased with a Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with lubeable style dust cap that is compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer idler hub kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - K-122461 idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- 1/2"-20 thread pitch lug studs
- Rated 1750 lbs. capacity per side
1 - L44649 bearing cone (pre-greased and pre-installed)
- 1-1/16" (1.063") inner diameter
1 - L68149 bearing cone (pre-greased and pre-installed)
- 1-3/8" (1.378") inner diameter
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
1 - 171255TB Grease seal (See Note)
- 1.719" inner diameter
- 2.565" outer diameter
1 - 1.98" outer diameter lube style cap
1 - Rubber lube style cap plug
5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 1" round spindle washer (1.03" ID x 1.68" OD)
1 - 1" 6 slotted spindle nut
1 - 1-3/4" cotter pin

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

Price$59.99

ID BRK12LHSA

1 of 3

BRK12LHSA 12" X 2" 5200LB-6000LB-7000LB Left Hand Self Adjusting Electric Brake Assembly

This is a LEFT SIDE SELF ADJUSTING brake assembly. Reduce precious time and aggravation on difficult brake repairs by using this easy to install complete brake assembly kit. These CSA certified kits provide durability, and reliability in braking performance. Used on 5200LB, 6000Lb and 7000LB axles. Sold individually.

Used on drivers side of trailer

Identified by black wire on the magnet

Self-adjusting brakes eliminates the needs for periodic manual adjustments.

Better Braking – Automotive grade friction material molded to brake shoes.
Linings are fully bonded to shoes for long life and more braking torque.
Cut linings instead of snapped offers less chance of cracking and crumbling.
E-coated backing plate resists wear and corrosion.
12" x 2" rated at 7,000 lb. capacity - per axle.
Left Hand.

Direct interchange for the following brands and part numbers:

HuskyTow - 32290

TRP-TruRyde - BK-12E-01SA

Ultra-Fab - 48-979214

Ultra-Fab - 48-979254

Price$59.99

ID BRK12RHSA

1 of 3

BRK12RHSA 12" X 2" 5200LB-6000LB-7000LB Right Hand Self Adjusting Electric Brake Assembly

This is a RIGHT SIDE SELF ADJUSTING brake assembly. Reduce precious time and aggravation on difficult brake repairs by using this easy to install complete brake assembly kit. These CSA certified kits provide durability, and reliability in braking performance. Used on 5200LB, 6000Lb and 7000LB axles. Sold individually.

Used on passenger side of trailer

Identified by black wire on the magnet

Self-adjusting brakes eliminates the needs for periodic manual adjustments.

Better Braking – Automotive grade friction material molded to brake shoes.
Linings are fully bonded to shoes for long life and more braking torque.
Cut linings instead of snapped offers less chance of cracking and crumbling.
E-coated backing plate resists wear and corrosion.
12" x 2" rated at 7,000 lb. capacity - per axle.
Right Hand.

Direct interchange for the following brands and part numbers:

HuskyTow - 32291

TRP-TruRyde - BK-12E-02SA

Ultra-Fab - 48-979215

Ultra-Fab - 48-979255

Price$59.99

ID RVD-U-6550

1 of 4

RVD-U-6550 3500lb 6 on 5-1/2" Bolt Pattern 10" Brake Drum

Import 10" hub and drum fits 3500lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 10" x 2-1/4" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 1750 lbs. capacity per side
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
Works with L68149 outer bearing cone and L68149 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$63.99

ID 008-251-05

1 of 5

008-251-05 3500lb 6 on 5-1/2" Bolt Pattern Idler Hub

Dexter 8-251-5 idler hub fits 2990lb to 3500lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

1 - Idler hub with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

4-1/4" overall height
1/2"-20 thread pitch lug studs
1 - L44610 outer bearing race (pre-installed)
1 - L68111 inner bearing race (pre-installed)
has a 1.98" bore diameter
Rated 1750 lbs. capacity per side

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$69.99