parts and accessories at Freeway Trailer Sales

ID RDJ-2K

1 of 4

RDJ2K 3000 lb Capacity Variable Height Top-wind Ultimate A-Frame Tongue Jack

Topwind variable height adjustable trailer tongue jack used with trailers that have an a-frame coupler. Easy bolt-on installation. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories and comes with a standard foot pad.

3,000lb Support Capacity / 2,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Includes standard foot pad
Quick release locking pin allows for faster operation of the trailer jack
All metal construction for value and durability
Interior roller bearings for product performance, easier cranking power, and trailer jack longevity
Zinc-coated trailer jack for maximum corrosion resistance
Rapid quick-release adjustment saves time
Variable rapid height adjustments with seven available hole settings - set 2" apart
No extra blocks are needed under the trailer jack to gain extra height
Easy comfort grip handle for safe cranking
Retracts flush with the bottom of the trailer to eliminate potential damage to the jack and trailer
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Leg extends 15-1/2"

Dimensions see image:
These numbers are variable due to the type of rapid adjustment for the jack

(A) Retracted = 2" up to 14-1/4"
(B) Extended = 17-1/2" up to 29-1/2"
(C) Clearance = 7" up to 19"

The Ultimate Trailer Jack was designed for the ultimate convenience, speed, and simplicity. Just pull the easy-to-access release pin to drop the entire jack tube down for quick adjustments. Even better, there is no longer any need for space fillers with this jack, so put away the drop leg, blocks, and bricks! With this jack, setting up your trailer at your destination has never been easier.

The jack features an outer tube that extends to provide extra lift. Pulling the release pin and dropping the outer tube gives rapid adjustments of lift, ensuring a solid foundation with the ground. Keep setting your worries aside with the Ultimate Trailer Jack because its compact profile keeps the jack flush with the trailer frame when it's retracted. You no longer have to worry about catching your jack on uneven terrain while you tow.

The Ultimate Trailer Jack is easy-to-use, quick, and dependable. If you're looking to spend less time setting up your trailer and more time doing the things that make you happy, then the Ultimate Trailer Jack is for you.

Price$89.99

ID K08-248-1G

1 of 7

K08-248-1G 3500lb 5 on 4-1/2" Bolt Pattern Pre-Greased Idler Hub Kit with 1-1/16" and 1-3/8" Bearing Set

The Dexter Axle K08-248-1G pre greased idler hub kit fits 2990lb to 3500lb capacity axles and has a 5 on 4-1/2" bolt pattern. No need to assemble, this hub drum already has the bearings greased with Dexter Axle™ Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combinations and comes with both lubeable style dust cap and standard solid dust cap that are both interchangeable with all E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

Complete pre-greased fully assembled boxed trailer idler hub kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - 008-248-05 idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- 6-1/4" diameter flange
- 4-1/8" overall height
- 1/2"-20 thread pitch lug studs
- Rated 1750 lbs. capacity per side
1 - 031-031-02 L44649 bearing cone (pre-greased and pre-installed)
- 1-1/16" (1.063") inner diameter
1 - 031-033-02 L68149 bearing cone (pre-greased and pre-installed)
- 1-3/8" (1.378") inner diameter
1 - 031-031-01 L44610 outer bearing cup race (pre-installed)
1 - 031-033-01 L68111 inner bearing cup race (pre-installed)
1 - 010-019-00 (171255TB) Grease seal (See Note)
- 1.719" inner diameter
- 2.565" outer diameter
1 - 021-041-01 1.98" outer diameter lube style cap
1 - 085-001-00 rubber lube style cap plug
1 - 021-003-00 1.98" outer diameter standard dust cap
5 - 006-080-00 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 005-023-00 1" d shaped spindle washer
1 - 005-027-00 1" round spindle washer
1 - 006-176-00 1" slotted spindle nut
1 - 019-002-00 cotter pin
1 - 006-191-00 1" hex spindle nut
1 - 006-190-00 d shaped hex nut retainer
1 - 059-831-00 instruction sheet

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

Price$90.99

ID 19-100

1 of 5

19-100 3500lb 5 on 4-1/2" Bolt Pattern 10" Pre-Greased Brake Drum Kit

The 19-100 pre greased 10" hub and drum kit has a 5 on 4-1/2" bolt pattern and fits 3500lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 10" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - Integrated hub-and-drum with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 10" x 2-1/4" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 1750 lbs. capacity per side
1 - L44649 bearing cone (pre-greased and pre-installed)
- 1-1/16" (1.063") inner diameter
1 - L68149 bearing cone (pre-greased and pre-installed)
- 1-3/8" (1.378") inner diameter
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
1 - 171255TB Grease seal (See Note)
- 1.719" inner diameter
- 2.565" outer diameter
1 - 1.98" outer diameter lube style cap and rubber plug
1 - 1.98" outer diameter standard dust cap
5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

Price$91.00

ID B12H-73

B12H-73 12" x 2" Left Hand Dacromet Free-Backing Hydraulic Trailer Brake

The B12H-73 12" x 2" Left Hand Free Backing Hydraulic Dacromet Brake Assembly - 6'000lb Capacity Per Pair.

This hydraulic brake assembly includes standard features such as Dacromet backing plates, Stainless steel hardware, uni-servo aluminum wheel cylinder and glued shoes linings for long life, especially for the marine applications. Marine-grade hydraulic drum brake assembly is great for boat trailers. Designed for use with surge-type trailer brake actuators. Corrosion-resistant Dacromet steel construction.

Free backing assembly incorporates a “fall-away” shoe which diminishes shoe drag when backing up. Requires periodic manual adjustment. Marine cluster has galvanized back plate, stainless steel spring hardware, aluminum wheel cylinder and glued marine brake shoe linings. Free-backing brakes let your trailer move in reverse without the brakes being activated by your surge actuator. This brake is used in drum surge applications and are needed if your actuator does not have a reverse lockout, which is a mechanism that ensures that the actuator does not activate when your rig moves in reverse.

Left hand (Driver's side)
Free backing
Dacromet corrosion resistant coating
For use with a 12" inside diameter drum
Rated for 6,000lb axles (3,000lbs each)
Standard 5 on 3-7/8"" center bolt mount flange - universally fits all standard axle flange bolt pattern.

Price$92.99

ID B12H-74

B12H-74 12" x 2" Right Hand Dacromet Free-Backing Hydraulic Trailer Brake

The B12H-74 12" x 2" Right Hand Free Backing Hydraulic Dacromet Brake Assembly - 6'000lb Capacity Per Pair.

This hydraulic brake assembly includes standard features such as Dacromet backing plates, Stainless steel hardware, uni-servo aluminum wheel cylinder and glued shoes linings for long life, especially for the marine applications. Marine-grade hydraulic drum brake assembly is great for boat trailers. Designed for use with surge-type trailer brake actuators. Corrosion-resistant Dacromet steel construction.

Free backing assembly incorporates a “fall-away” shoe which diminishes shoe drag when backing up. Requires periodic manual adjustment. Marine cluster has galvanized back plate, stainless steel spring hardware, aluminum wheel cylinder and glued marine brake shoe linings. Free-backing brakes let your trailer move in reverse without the brakes being activated by your surge actuator. This brake is used in drum surge applications and are needed if your actuator does not have a reverse lockout, which is a mechanism that ensures that the actuator does not activate when your rig moves in reverse.

Right hand (Passenger's side)
Free backing
Dacromet corrosion resistant coating
For use with a 12" inside diameter drum
Rated for 6,000lb axles (3,000lbs each)
Standard 5 on 3-7/8"" center bolt mount flange - universally fits all standard axle flange bolt pattern.

Price$92.99

ID 12HD865DRUM

1 of 5

12HD865DRUM 7000lb 8 on 6-1/2" Bolt Pattern 12" Brake Drum with 1/2" Lug Studs

Import 12" hub and drum fits 7000lb capacity axles and has a 8 on 6-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 3500 lbs. capacity per side
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 14125A outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$95.99

ID 916HD865DRUM

1 of 5

916HD865DRUM 7000lb 8 on 6-1/2" Bolt Pattern 12" Brake Drum with 9/16" Lug Studs

Dexter 8-219-13 12" hub and drum fits 7000lb capacity axles and has a 8 on 6-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
9/16"-18 thread pitch lug studs
Rated 3500 lbs. capacity per side
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 14125A outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$95.99

ID HD655DRUM

1 of 5

HD655DRUM 6000lb 6 on 5-1/2" Bolt Pattern 12" Brake Drum

Import 12" hub and drum fits 5000lb and 6000lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 3000 lbs. capacity per side
1 - 15245 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 15123 outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048 which has a 1.250" inner diameter. This drum uses a 15123 outer bearing which is the same bearing inner diameter and will fit the 5000lb and 5200lb axles. The only difference is the outer bore of the drum. If you have LM67048 outer bearings then we recommend buying the 15123 bearing that fits this.

Price$95.99

ID 45448

1 of 4

45448 12K 8" Drop Ball Mount

Fits trailer hitches with a 2" x 2" receiver tube opening
Equipped with a 1-1/4" hole to accept a trailer ball shank
7" rise or 8" drop for precise trailer leveling
Shank constructed from solid steel for optimum strength
CNC-formed, robotically welded and mechanically descaled for a perfect fit
Protected by a durable powder coat finish
Made in USA

When you demand more from your towing equipment, CURT heavy-duty ball mounts answer the call. For towing those especially heavy loads and bulky trailers, you need a ball mount that knows how to handle itself when the going gets tough. Our heavy-duty ball mounts are constructed from quality steel and feature a 2" x 2" shank. They are built to complement CURT class 4 trailer hitches and are perfect for towing large boat trailers, RVs, livestock and horse trailers as well as a variety of other farm and industrial-type trailers (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). With a few different drop height options and the ability to flip for optional rise, CURT heavy-duty ball mounts are built to work as hard as you do, from sunup to sundown.

This HD ball mount has a gross trailer weight capacity of 12,000 lbs. and tongue weight rating of 1,200 lbs. It measures 9-3/8" in length, has an 8" drop and can be flipped to provide 7" of rise. As with most of our ball mount line, CURT class 4 ball mounts are CNC-formed, robotically welded and mechanically descaled to create a flawless product. We finish our heavy-duty ball mounts in a gloss black powder coat to give them superior rust, chip and UV resistance. They also come with 1-1/4" ball hole to accept a trailer ball with a 1-1/4" shank.

Price$96.99