parts and accessories at Freeway Trailer Sales

ID K08-247-1G

1 of 6

K08-247-1G 3500lb 5 on 4-1/2" Bolt Pattern 10" Pre-Greased Brake Drum Kit

The Dexter K08-247-1G pre greased 10" hub and drum kit has a 5 on 4-1/2" bolt pattern and fits 3500lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Dexter Axle™ Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 10" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - 008-247-05 Integrated hub-and-drum with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 10" x 2-1/4" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 1750 lbs. capacity per side
1 - 031-031-02 L44649 bearing cone (pre-greased and pre-installed)
- 1-1/16" (1.063") inner diameter
1 - 031-033-02 L68149 bearing cone (pre-greased and pre-installed)
- 1-3/8" (1.378") inner diameter
1 - 031-031-01 L44610 outer bearing cup race (pre-installed)
1 - 031-033-01 L68111 inner bearing cup race (pre-installed)
1 - 010-019-00 171255TB Grease seal (See Note)
- 1.719" inner diameter
- 2.565" outer diameter
1 - 021-041-01 1.98" outer diameter lube style cap and rubber plug
1 - 085-001-00 rubber lube style cap plug
1 - 021-003-00 1.98" outer diameter standard dust cap
5 - 006-080-00 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 005-023-00 1" d shaped spindle washer
1 - 005-027-00 1" round spindle washer
1 - 006-176-00 1" slotted spindle nut
1 - 019-002-00 cotter pin
1 - 006-191-00 1" hex spindle nut
1 - 006-190-00 d shaped hex nut retainer
1 - 059-831-00 instruction sheet

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

Price$127.99

ID A6008

1 of 2

A6008 9"W x 72"L x 20"H x .090 Tandem Axle Smooth Aluminum Teardrop Fender

Tandem axle smooth aluminum tear drop style single radius fender. Measures 9" wide x 72" long x 20" tall x .090 thickness. Much thicker than standard .063 factory thickness reduces vibration cracking and results in a more stable durable replacement part. Fender can be used on left or right side of trailer and is not pre-drilled.

Fender is a single raduis meaning it has a rounded outer edge and a 90 degree flat back 3/4" down lip for concealed mounting so the screws are not visable.

Direct replacement for Wells Cargo, Haulmark, and American Hauler enclosed trailers part# 351820. Look enclosed trailer part# K100-110 and Alcom enclosed trailers part# 67-0016

May also be interchangeable with other brands

Shipping for this item is based on dimensional freight

Price$128.99

ID 45430

1 of 4

45430 21K 4" Drop 3" Shank Ball Mount

Fits trailer hitches with a 3" x 3" receiver tube opening
Tested and rated to 21,000 lbs. GTW and 2,800 lbs. TW
Constructed from solid, forged steel for superior strength
Equipped with a 1-1/4" hole to accept a trailer ball shank
2" rise and 4" drop for use with larger trucks
Protected by a highly durable carbide powder coat finish

Complementing the heavy-duty size and capacity of 3" x 3" trailer hitches, the CURT Industrial Duty ball mount is a dependable extension of your truck. Its 3" x 3" shank is built with an I-beam shape, giving it greater strength for maximum towing capacity. It is constructed from solid, forged steel, making it even stronger for the toughest of towing jobs.

To make sure this heavy-duty ball mount can keep up with the hardest-working trucks, we fully test it at our Detroit engineering facility. This allows us to rate this heavy-duty ball mount to 21,000 lbs. GTW and 2,800 lbs. TW.

CURT Industrial Duty ball mounts are also built to outlast the elements, featuring a highly durable carbide black powder coat finish, protecting the ball mount against rust, scratches and chipping. This particular ball mount also comes with a 1-1/4" trailer ball hole and a 2" rise and 4" drop to accommodate larger pickup trucks, helping the trailer to ride level with the road.

Price$129.99

ID 19-125

1 of 5

19-125 6000lb 6 on 5-1/2" Bolt Pattern 12" Pre-Greased Brake Drum Kit

The 19-125 pre greased 12" hub and drum kit has a 6 on 5-1/2" bolt pattern and fits 5000lb and 6000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 12" x 2" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 3000 lbs. capacity per side
1 - 15123 bearing cone (pre-greased and pre-installed)
- 1-1/4" (1.250") inner diameter
1 - 25580 bearing cone (pre-greased and pre-installed)
- 1-3/4" (1.750") inner diameter
1 - 15245 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
1 - 22333TB Grease seal (See Note)
- 2.250" inner diameter
- 3.376" outer diameter
1 - 2.44" outer diameter lube style cap and rubber plug
1 - 2.44" outer diameter standard dust cap
6 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Additional Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048 which is the same 1.250" inner diameter that this drum kit 15123 bearing uses. the difference is the outer bore of the drum but all the parts in this kit will still work on the axle beam.

Price$133.99

ID 10050

1 of 5

10050 8 TON Combination Mount with 2" Ball and Mount Kit

Buyers Products 8 Ton (16,000 lb) Combination Hitch combines both a 2" ball hitch and pintle hook into one product. It allows you to pull loads that have either a coupler or a drawbar/pintle ring without having to change hitches. The hitch is ideal for contractors, tradesmen and haulers who tow a range of construction equipment.

The hitch comes with 2 inch ball. It is bolt-mounted (drilling template included). A mounting kit with Grade 8 fasteners is included. works with drawbar lunette eyes that are 2-1/2" to 3" inner diameter.

Handles multiple towing needs with its interchangeable design. Ideal for a wide range of light to medium duty trucks with a maximum gross towing weight of 16,000 lb. Max 3,000 lb. tongue weight. Versatile design can accommodate a variety of trailer heights. Tough, interchangeable forged steel hitch ball. Durable and long-lasting drop-forged construction, with a corrosion-resistant powder-coated finish.

Price$142.99

ID 10055

1 of 5

10055 8 TON Combination Mount with 2-5/16" Ball and Mount Kit

Buyers Products 8 Ton (16,000 lb) Combination Hitch combines both a 2-5/16" ball hitch and pintle hook into one product. It allows you to pull loads that have either a coupler or a drawbar/pintle ring without having to change hitches. The hitch is ideal for contractors, tradesmen and haulers who tow a range of construction equipment.

The hitch comes with 2-5/16 inch ball. It is bolt-mounted (drilling template included). A mounting kit with Grade 8 fasteners is included. works with drawbar lunette eyes that are 2-1/2" to 3" inner diameter.

Handles multiple towing needs with its interchangeable design. Ideal for a wide range of light to medium duty trucks with a maximum gross towing weight of 16,000 lb. Max 3,000 lb. tongue weight. Versatile design can accommodate a variety of trailer heights. Tough, interchangeable forged steel hitch ball. Durable and long-lasting drop-forged construction, with a corrosion-resistant powder-coated finish.

Price$142.99

ID WS26

1 of 6

WS26 4 Piece Keyed Alike Lock Kit

This Keyed alike 4 piece Weigh-Safe lock set features a WS22 universal coupler lock that will help you secure your trailer while it’s parked. The hardened steel dual shank lock is strong and durable. Fits a wide range of trailer couplers. The WS11 Adjustable Trailer Coupler Latch Lock is 4-1/2" long and is 1/4" diameter. Adjustable to fit a wide range of coupler latches. It is made of stainless steel. The water tight cap provides additional protection from moisture and dirt. Hitch Locking Pin fits all 2", 2.5", and 3" receivers. The pin portion is 3-1/2" long, with a diameter of 5/8".

However, if your 3" receiver uses thicker material that surpasses 3-1/2", this hitch pin will not fit.

Kit includes:

4 - Keyed alike keys

1 - WS22 Universal coupler lock for when the trailer is sitting unattended

Sleek & solid design made of air-craft grade aluminum and hardened steel
Easy push-in lock
Both locking member arms lock in place for improved theft prevention
Fits a wide range of 1-7/8”, 2”, and 2-5/16” tongue type trailer couplers

1 - WS11 Adjustable coupler latch lock for when the trailer is being towed on the ball

The WS11 Adjustable Trailer Coupler Latch Lock is 4-1/2" long and is 1/4" diameter.
Adjustable to fit a wide range of coupler latches. It is made of stainless steel.
The water tight cap provides additional protection from moisture and dirt.

1 - WS05 Locking hitch pin for locking your ball mount into your tow vehicles hitch

Hitch Locking Pin fits all 2", 2.5", and 3" receivers.
The pin portion is 3-1/2" long, with a diameter of 5/8"
However, if your 3" receiver uses thicker material that surpasses 3-1/2", this hitch pin will not fit.

1 - WS12 Padlock

Made from hardened steel

Price$142.99

ID 008-219-04

1 of 4

008-219-04 7000lb 8 on 6-1/2" Bolt Pattern 12" Brake Drum with 1/2" Lug Studs

Dexter 8-219-4 12" hub and drum fits 7000lb capacity axles and has a 8 on 6-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 3500 lbs. capacity per side
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 14125A outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$143.99

ID 19-130

1 of 5

19-130 7000lb 8 on 6-1/2" Bolt Pattern 12" Pre-Greased Brake Drum Kit with 1/2" Lug Studs

The 19-130 pre greased 12" hub and drum kit has a 8 on 6-1/2" bolt pattern and fits 7000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 12" x 2" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 3500 lbs. capacity per side
1 - 14125A bearing cone (pre-greased and pre-installed)
- 1-1/4" (1.250") inner diameter
1 - 25580 bearing cone (pre-greased and pre-installed)
- 1-3/4" (1.750") inner diameter
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
1 - 22333TB Grease seal (See Note)
- 2.250" inner diameter
- 3.376" outer diameter
1 - 2.72" outer diameter lube style cap and rubber plug
1 - 2.72" outer diameter standard dust cap
8 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Price$147.99

ID 2024013262

1 of 6

2024013262 6000lb 6 on 5-1/2" Bolt Pattern 12" Pre-Greased Brake Drum Kit

The Lippert 2024013262 pre greased 12" hub and drum kit has a 6 on 5-1/2" bolt pattern and fits 5000lb and 6000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with a Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - K-122463 Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 12" x 2" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 3000 lbs. capacity per side
1 - 15123 bearing cone (pre-greased and pre-installed)
- 1-1/4" (1.250") inner diameter
1 - 25580 bearing cone (pre-greased and pre-installed)
- 1-3/4" (1.750") inner diameter
1 - 15245 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
1 - 22333TB Grease seal (See Note)
- 2.250" inner diameter
- 3.376" outer diameter
1 - 2.44" outer diameter lube style cap
1 - Rubber lube style cap plug
6 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 1" round spindle washer (1.03" ID x 2.00" OD)
1 - 1" 6 slotted spindle nut
1 - 1-3/4"cotter pin

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Additional Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048 which is the same 1.250" inner diameter that this drum kit 15123 bearing uses. the difference is the outer bore of the drum but all the parts in this kit will still work on the axle beam.

Price$147.99