parts and accessories at Freeway Trailer Sales

ID K08-201-2G

1 of 6

K08-201-2G 6000lb 6 on 5-1/2" Bolt Pattern 12" Pre-Greased Brake Drum Kit

The Dexter K08-201-2G pre greased 12" hub and drum kit has a 6 on 5-1/2" bolt pattern and fits 5000lb and 6000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Dexter Axle™ Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - 008-201-09 Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 12" x 2" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 3000 lbs. capacity per side
1 - 031-029-02 15123 bearing cone (pre-greased and pre-installed)
- 1-1/4" (1.250") inner diameter
1 - 031-030-02 25580 bearing cone (pre-greased and pre-installed)
- 1-3/4" (1.750") inner diameter
1 - 031-029-01 15245 outer bearing cup race (pre-installed)
1 - 031-030-01 25520 inner bearing cup race (pre-installed)
1 - 010-036-00 22333TB Grease seal (See Note)
- 2.250" inner diameter
- 3.376" outer diameter
1 - 021-042-01 2.44" outer diameter lube style cap
1 - 085-001-00 rubber lube style cap plug
1 - 021-001-00 2.44" outer diameter standard dust cap
6 - 006-080-00 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 005-057-00 1" d shaped spindle washer
1 - 005-223-00 1" round spindle washer
1 - 006-176-00 1" slotted spindle nut
1 - 019-002-00 cotter pin
1 - 006-191-00 1" hex spindle nut
1 - 006-190-00 d shaped hex nut retainer
1 - 059-831-00 instruction sheet

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Additional Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048 which is the same 1.250" inner diameter that this drum kit 15123 bearing uses. the difference is the outer bore of the drum but all the parts in this kit will still work on the axle beam.

Price$172.99

ID A6008-TP

1 of 2

A6008-TP K100-111 9"W x 72"L x 20"H X .100 Tandem Axle Tread Plate Aluminum Teardrop Fender

Tandem axle tread plate aluminum tear drop style single radius fender. Measures 9" wide x 72" long x 20" tall x .100 thickness. Much thicker than standard .063 factory thickness reduces vibration cracking and results in a more stable durable replacement part. Fender can be used on left or right side of trailer and is not pre-drilled.

Fender is a single radius meaning it has a rounded outer edge and a 90 degree flat back 3/4" down lip for concealed mounting so the screws are not visible.

Direct replacement for Look enclosed trailer part# K100-111 and ST5908U

May also be interchangeable with other brands

Shipping for this item is based on dimensional freight

Price$179.99

ID 45432

1 of 4

45432 21K 8" Drop 3" Shank Ball Mount

Fits trailer hitches with a 3" x 3" receiver tube opening
Tested and rated to 21,000 lbs. GTW and 2,800 lbs. TW
Constructed from solid, forged steel for superior strength
Equipped with a 1-1/4" hole to accept a trailer ball shank
6" rise and 8" drop for use with larger, lifted trucks
Protected by a highly durable carbide powder coat finish

Complementing the heavy-duty size and capacity of 3" x 3" trailer hitches, the CURT Industrial Duty ball mount is a dependable extension of your truck. Its 3" x 3" shank is built with an I-beam shape, giving it greater strength for maximum towing capacity. It is constructed from solid, forged steel, making it even stronger for the toughest of towing jobs.

To make sure this heavy-duty ball mount can keep up with the hardest-working trucks, we fully test it at our Detroit engineering facility. This allows us to rate this heavy-duty ball mount to 21,000 lbs. GTW and 2,800 lbs. TW.

CURT Industrial Duty ball mounts are also built to outlast the elements, featuring a highly durable carbide black powder coat finish, protecting the ball mount against rust, scratches and chipping. This particular ball mount also comes with a 1-1/4" trailer ball hole and a 6" rise and 8" drop to accommodate larger, lifted pickup trucks, helping the trailer to ride level with the road.

Price$184.99

ID 510864

1 of 4

510864 5pc Ratcheting Axle Strap Pack

This convenient 4-pack of car tie-down straps is an easy way to pick up enough straps to secure all 4 tires on the vehicle you need to transport. Includes 4 Blue 2" x 8' combination axle strap with adjustable tieback loop and a storage bag. Keep your vehicle securely fastened with this 8-foot Ratchet and Axle Strap combination tie-down. Complete with a compact and easy-to-operate wide handle ratchet, two twisted snap hooks, and a 2-inch delta ring. The D-ring is fully adjustable and works alongside a 2-inch x 1-inch adjusting ring to move the delta ring to the desired location on the strap. To further protect the axle strap tieback area, a sleeve is used to protect the strap from wear and tear.

2" x 8' Polyester webbing
Adjustable tieback delta ring
Twisted snap hooks on both ends
Fixed end 6" - 11" to end of twisted snap hook
3,333 lb. Working Load Limit
10,000 lb. Break Strength

Storage bag measures 18" long x 11" wide x 9' tall for storing your straps with plenty of space for other towing necessities.

Remember to use all four tie-down points when securing a vehicle.

Price$184.99

ID K08-219-1G

1 of 6

K08-219-1G 7000lb 8 on 6-1/2" Bolt Pattern 12" Pre-Greased Brake Drum Kit with 1/2" Lug Studs

The Dexter K08-219-1G pre greased 12" hub and drum kit has a 8 on 6-1/2" bolt pattern and fits 7000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Dexter Axle™ Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - 008-219-04 Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 12" x 2" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 3500 lbs. capacity per side
1 - 031-017-02 14125A bearing cone (pre-greased and pre-installed)
- 1-1/4" (1.250") inner diameter
1 - 031-030-02 25580 bearing cone (pre-greased and pre-installed)
- 1-3/4" (1.750") inner diameter
1 - 031-017-01 14276 outer bearing cup race (pre-installed)
1 - 031-030-01 25520 inner bearing cup race (pre-installed)
1 - 010-036-00 22333TB Grease seal (See Note)
- 2.250" inner diameter
- 3.376" outer diameter
1 - 021-043-01 2.72" outer diameter lube style cap
1 - 085-001-00 rubber lube style cap plug
1 - 021-039-00 2.72" outer diameter standard dust cap
8 - 006-080-00 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 005-057-00 1" d shaped spindle washer
1 - 005-223-00 1" round spindle washer
1 - 006-176-00 1" slotted spindle nut
1 - 019-002-00 cotter pin
1 - 006-191-00 1" hex spindle nut
1 - 006-190-00 d shaped hex nut retainer
1 - 059-831-00 instruction sheet

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Price$196.99

ID ST205-75R15LRC545BM

1 of 5

ST205/75R15LRC545BM Black Modular Rainier ST Radial Combo

Pre-assembled tire and wheel combo. Features a Rainier ST radial trailer tire ST205/75R15 with a 6PR(ply rating - see foot note) and C load capacity rating of 1,820 lbs per tire at 50psi cold mounted on a black painted modular 15" wheel and has a lug bolt pattern that fits 5 bolt on 4-1/2" spacing.

The Tire:
The Rainier ST was designed with original equipment manufacturers in mind. With a light truck inspired tread pattern, added durability, high load capacity, and can withstand the rigorous demands of ST tires.

Wider center rib for improved wet traction and lower rolling resistance
Solid main tread blocks on tread to enhance self-cleaning ability
Varied tread pitch designed to reduce road noise
Integrated tread blades designed to enhance tires road grip in all weather
Improved heat dissipation with extended tread life

The Wheel:
Where tradition meets modern refinement. Steel wheels by Tredit are built for the long haul. The superior materials are used to perform at the highest of standards. Strong sidewalls to protect against accidental cuts and wear. Today’s steel trailer wheels are constructed from the highest grades of steel alloys. These steels are stronger, lighter, and can carry the loads required by modern towables.

High quality steel alloy for strength and weight reduction to other brands
All welds inspected for penetration and quality

Foot note - The PR value of a tire is an important indicator of the tire's load-bearing capacity and durability, not the actual number of plies of the tire. Tires with different PR values have different load-bearing capacity and air pressure standards.

Price$206.99

ID ST205-75R15LRC545SM

1 of 5

ST205/75R15LRC545SM Silver Modular Rainier ST Radial Combo

Pre-assembled tire and wheel combo. Features a Rainier ST radial trailer tire ST205/75R15 with a 6PR(ply rating - see foot note) and C load capacity rating of 1,820 lbs per tire at 50psi cold mounted on a Silver painted modular 15" wheel and has a lug bolt pattern that fits 5 bolt on 4-1/2" spacing.

The Tire:
The Rainier ST was designed with original equipment manufacturers in mind. With a light truck inspired tread pattern, added durability, high load capacity, and can withstand the rigorous demands of ST tires.

Wider center rib for improved wet traction and lower rolling resistance
Solid main tread blocks on tread to enhance self-cleaning ability
Varied tread pitch designed to reduce road noise
Integrated tread blades designed to enhance tires road grip in all weather
Improved heat dissipation with extended tread life

The Wheel:
Where tradition meets modern refinement. Steel wheels by Tredit are built for the long haul. The superior materials are used to perform at the highest of standards. Strong sidewalls to protect against accidental cuts and wear. Today’s steel trailer wheels are constructed from the highest grades of steel alloys. These steels are stronger, lighter, and can carry the loads required by modern towables.

High quality steel alloy for strength and weight reduction to other brands
All welds inspected for penetration and quality

Foot note - The PR value of a tire is an important indicator of the tire's load-bearing capacity and durability, not the actual number of plies of the tire. Tires with different PR values have different load-bearing capacity and air pressure standards.

Price$206.99

ID ST205-75R15LRC545WS

1 of 5

ST205/75R15LRC545WS White Spoke Rainier ST Radial Combo

Pre-assembled tire and wheel combo. Features a Rainier ST radial trailer tire ST205/75R15 with a 6PR(ply rating - see foot note) and C load capacity rating of 1,820 lbs per tire at 50psi cold mounted on a white painted spoke15" wheel and has a lug bolt pattern that fits 5 bolt on 4-1/2" spacing.

The Tire:
The Rainier ST was designed with original equipment manufacturers in mind. With a light truck inspired tread pattern, added durability, high load capacity, and can withstand the rigorous demands of ST tires.

Wider center rib for improved wet traction and lower rolling resistance
Solid main tread blocks on tread to enhance self-cleaning ability
Varied tread pitch designed to reduce road noise
Integrated tread blades designed to enhance tires road grip in all weather
Improved heat dissipation with extended tread life

The Wheel:
Where tradition meets modern refinement. Steel wheels by Tredit are built for the long haul. The superior materials are used to perform at the highest of standards. Strong sidewalls to protect against accidental cuts and wear. Today’s steel trailer wheels are constructed from the highest grades of steel alloys. These steels are stronger, lighter, and can carry the loads required by modern towables.

High quality steel alloy for strength and weight reduction to other brands
All welds inspected for penetration and quality

Foot note - The PR value of a tire is an important indicator of the tire's load-bearing capacity and durability, not the actual number of plies of the tire. Tires with different PR values have different load-bearing capacity and air pressure standards.

Price$206.99

ID K08-219-2G

1 of 6

K08-219-2G 7000lb 8 on 6-1/2" Bolt Pattern 12" Pre-Greased Brake Drum Kit with 9/16" Lug Studs

The Dexter K08-219-2G pre greased 12" hub and drum kit has a 8 on 6-1/2" bolt pattern and fits 7000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Dexter Axle™ Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - 008-219-13 Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 12" x 2" hydraulic and electric trailer brakes
- 9/16"-18 thread pitch lug studs
- Rated 3500 lbs. capacity per side
1 - 031-017-02 14125A bearing cone (pre-greased and pre-installed)
- 1-1/4" (1.250") inner diameter
1 - 031-030-02 25580 bearing cone (pre-greased and pre-installed)
- 1-3/4" (1.750") inner diameter
1 - 031-017-01 14276 outer bearing cup race (pre-installed)
1 - 031-030-01 25520 inner bearing cup race (pre-installed)
1 - 010-036-00 22333TB Grease seal (See Note)
- 2.250" inner diameter
- 3.376" outer diameter
1 - 021-043-01 2.72" outer diameter lube style cap
1 - 085-001-00 rubber lube style cap plug
1 - 021-039-00 2.72" outer diameter standard dust cap
8 - 006-053-00 9/16"-18 thread pitch zinc plated 60 degree coned lug nuts
1 - 005-057-00 1" d shaped spindle washer
1 - 005-223-00 1" round spindle washer
1 - 006-176-00 1" slotted spindle nut
1 - 019-002-00 cotter pin
1 - 006-191-00 1" hex spindle nut
1 - 006-190-00 d shaped hex nut retainer
1 - 059-831-00 instruction sheet

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Price$213.99