parts and accessories at Freeway Trailer Sales

ID 089-135-23

1 of 2

089-135-23 Left Hand Loaded Caliper Assembly for all DB Series UFP Disc Brakes

UFP/Dexter Marine Left hand UFP DB model caliper with zinc plated body for corrosion resistance, hard chrome plated piston, stainless steel brake pad guides and stainless steel anti-rattle clips for smooth and quiet trailering and braking. It also includes pre-loaded organic brake pads for corrosion protection and reduced rotor wear. and mounting bolts. Works on all 3500lb to 6000lb capacity UPF/Dexter DB-SERIES Brake Systems. DB-SERIES Brake Calipers mount directly to trailer axle brake flange with 2 mounting bolts.

Replaces old UFP Part# 089-008-01 and 45010-L

FITS OLD UFP DB-3.5K, MOST 4.2K, 5.2K AND 6.0K SERIES DISK BRAKES

Does not work with UFP 10-1/4" diameter rotor

Price$149.99

ID 089-135-24

1 of 2

089-135-24 Right Hand Loaded Caliper Assembly for all DB Series UFP Disc Brakes

UFP/Dexter Marine Right hand UFP DB model caliper with zinc plated body for corrosion resistance, hard chrome plated piston, stainless steel brake pad guides and stainless steel anti-rattle clips for smooth and quiet trailering and braking. It also includes pre-loaded organic brake pads for corrosion protection and reduced rotor wear. and mounting bolts. Works on all 3500lb to 6000lb capacity UPF/Dexter DB-SERIES Brake Systems. DB-SERIES Brake Calipers mount directly to trailer axle brake flange with 2 mounting bolts.

Replaces old UFP Part# 089-008-01 and 45010-L

FITS OLD UFP DB-3.5K, MOST 4.2K, 5.2K AND 6.0K SERIES DISK BRAKES

Does not work with UFP 10-1/4" diameter rotor

Price$149.99

ID 19-135

1 of 5

19-135 7000lb 8 on 6-1/2" Bolt Pattern 12" Pre-Greased Drum Kit with 9/16" Lug Studs

The 19-135 pre greased 12" hub and drum kit has a 8 on 6-1/2" bolt pattern and fits 7000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 12" x 2" hydraulic and electric trailer brakes
- 9/16"-18 thread pitch lug studs
- Rated 3500 lbs. capacity per side
1 - 14125A bearing cone (pre-greased and pre-installed)
- 1-1/4" (1.250") inner diameter
1 - 25580 bearing cone (pre-greased and pre-installed)
- 1-3/4" (1.750") inner diameter
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
1 - 22333TB Grease seal (See Note)
- 2.250" inner diameter
- 3.376" outer diameter
1 - 2.72" outer diameter lube style cap and rubber plug
1 - 2.72" outer diameter standard dust cap
8 - 9/16"-18 thread pitch zinc plated 60 degree coned lug nuts

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Price$150.99

ID 008-219-13

1 of 4

008-219-13 7000lb 8 on 6-1/2" Bolt Pattern 12" Brake Drum with 9/16" Lug Studs

Dexter 8-219-13 12" hub and drum fits 7000lb capacity axles and has a 8 on 6-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
9/16"-18 thread pitch lug studs
Rated 3500 lbs. capacity per side
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 14125A outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$152.99

ID 45431

1 of 4

45431 21K 6" Drop 3" Shank Ball Mount

Fits trailer hitches with a 3" x 3" receiver tube opening
Tested and rated to 21,000 lbs. GTW and 2,800 lbs. TW
Constructed from solid, forged steel for superior strength
Equipped with a 1-1/4" hole to accept a trailer ball shank
4" rise and 6" drop for use with larger, lifted trucks
Protected by a highly durable carbide powder coat finish

Complementing the heavy-duty size and capacity of 3" x 3" trailer hitches, the CURT Industrial Duty ball mount is a dependable extension of your truck. Its 3" x 3" shank is built with an I-beam shape, giving it greater strength for maximum towing capacity. It is constructed from solid, forged steel, making it even stronger for the toughest of towing jobs.

To make sure this heavy-duty ball mount can keep up with the hardest-working trucks, we fully test it at our Detroit engineering facility. This allows us to rate this heavy-duty ball mount to 21,000 lbs. GTW and 2,800 lbs. TW.

CURT Industrial Duty ball mounts are also built to outlast the elements, featuring a highly durable carbide black powder coat finish, protecting the ball mount against rust, scratches and chipping. This particular ball mount also comes with a 1-1/4" trailer ball hole and a 4" rise and 6" drop to accommodate larger, lifted pickup trucks, helping the trailer to ride level with the road.

Price$156.99

ID 2024013260

1 of 6

2024013260 7000lb 8 on 6-1/2" Bolt Pattern 12" Pre-Greased Brake Drum Kit with 1/2" Lug Studs

The Lippert 2024013260 pre greased 12" hub and drum kit has a 8 on 6-1/2" bolt pattern and fits 7000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with a Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - K-122465 Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 12" x 2" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 3500 lbs. capacity per side
1 - 14125A bearing cone (pre-greased and pre-installed)
- 1-1/4" (1.250") inner diameter
1 - 25580 bearing cone (pre-greased and pre-installed)
- 1-3/4" (1.750") inner diameter
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
1 - 22333TB Grease seal (See Note)
- 2.250" inner diameter
- 3.376" outer diameter
1 - 2.72" outer diameter lube style cap
1 - Rubber lube style cap plug
8 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 1" round spindle washer (1.06" ID x 2.00" OD)
1 - 1" 6 slotted spindle nut
1 - 1-3/4' cotter pin

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Price$157.99

ID 2024013261

1 of 6

2024013261 7000lb 8 on 6-1/2" Bolt Pattern 12" Pre-Greased Drum Kit with 9/16" Lug Studs

The Lippert 2024013261 pre greased 12" hub and drum kit has a 8 on 6-1/2" bolt pattern and fits 7000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with a Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - K-141290 Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 12" x 2" hydraulic and electric trailer brakes
- 9/16"-18 thread pitch lug studs
- Rated 3500 lbs. capacity per side
1 - 14125A bearing cone (pre-greased and pre-installed)
- 1-1/4" (1.250") inner diameter
1 - 25580 bearing cone (pre-greased and pre-installed)
- 1-3/4" (1.750") inner diameter
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
1 - 22333TB Grease seal (See Note)
- 2.250" inner diameter
- 3.376" outer diameter
1 - 2.72" outer diameter lube style cap
1 - Rubber lube style cap plug
8 - 9/16"-18 thread pitch zinc plated 60 degree coned lug nuts
1 - 1" round spindle washer (1.06" ID x 2.00" OD)
1 - 1" 6 slotted spindle nut
1 - 1-3/4" cotter pin

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Price$157.99

ID 300-029534

1 of 5

300-029534 3700lb 5 on 4-1/2" Bolt Pattern Oil Bath Idler Hub Kit with 1-1/16" and 1-3/8" Bearing Set

This Complete 300-029534 H1000 OIL BATH idler hub kit fits EZ Loader boat trailers 2005 to present that use a tapered spindle with 2990lb to 3700lb capacity rated axles and has a 5 on 4-1/2" bolt pattern. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands using standard 3500lbs tapered spindles.

Kit includes:

1 - 290-029195 H1000 Oil bath idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- 6-1/2" diameter flange
- 4-1/8" overall height
- 1/2"-20 thread pitch lug studs
- Rated 1850 lbs. capacity per side
1 - L44649 bearing
- 1-1/16" (1.063") inner diameter
1 - L68149 bearing
- 1-3/8" (1.378") inner diameter
1 - L44610 outer bearing race (pre-installed)
1 - L68111 inner bearing race (pre-installed)
1 - 250-031468 Rubber coated oil seal
- 1.687" inner diameter
- 2.565" outer diameter
1 - 250-034388 Aluminum oil bath cap with O-Ring
1 - 034-325-00 Pipe plug
1 - 005-164-00 D-style washer
1 - 006-210-00 Spindle nut
1 - 006-211-00 Spindle nut cotter pin retainer (Cookie Cutter)
5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - Cotter pin

This trailer oil bath idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Please note: EZ Loader suggest using 80-90w Gear Lube in their oil bath hubs.

Price$164.99

ID RM62000

1 of 3

RM62000 6 Ton Fixed Combination Ball Mount with 2" Ball

Buyers Products 6 Ton (12,000 lb.)Combination Hitch for 2 Inch Receivers features a patented design that combines a ball hitch and pintle hook into one product. It allows you to pull loads that have either a coupler or a drawbar/pintle ring without having to change hitches. Ideal for contractors, tradesmen and haulers who tow a range of lighter duty loads.

Handles multiple towing needs with its interchangeable design. Ideal for a wide range of light to medium duty trucks with a maximum gross towing weight of 12,000 lb. and features a 2,4000 lb. Max tongue weight rating. Versatile design can accommodate a variety of trailer heights. Tough, interchangeable forged steel hitch ball. Durable and long-lasting drop-forged construction, with a corrosion-resistant powder-coated finish.

The hitch fits into a 2 in. receiver tube, comes with 2 inch ball. Works with drawbar lunette eyes that are 2-1/2" to 3" inner diameter.

Hitch pin is sold separately.

Price$167.99

ID RM62516

1 of 3

RM62516 6 Ton Fixed Combination Ball Mount with 2-5/16" Ball

Buyers Products 6 Ton (12,000 lb.)Combination Hitch for 2 Inch Receivers features a patented design that combines a ball hitch and pintle hook into one product. It allows you to pull loads that have either a coupler or a drawbar/pintle ring without having to change hitches. Ideal for contractors, tradesmen and haulers who tow a range of lighter duty loads.

Handles multiple towing needs with its interchangeable design. Ideal for a wide range of light to medium duty trucks with a maximum gross towing weight of 12,000 lb. and features a 2,4000 lb. Max tongue weight rating. Versatile design can accommodate a variety of trailer heights. Tough, interchangeable forged steel hitch ball. Durable and long-lasting drop-forged construction, with a corrosion-resistant powder-coated finish.

The hitch fits into a 2 in. receiver tube, comes with 2-5/16 inch ball. Works with drawbar lunette eyes that are 2-1/2" to 3" inner diameter.

Hitch pin is sold separately.

Price$169.99

ID 008-219-09

1 of 3

008-219-09 7000lb 8 on 6-1/2" Bolt Pattern 12" Oil Bath Brake Drum with 1/2" Lug Studs

Dexter 8-219-9 12" OIL BATH STYLE hub and drum fits 6000lb and 7000lb capacity axles and has a 8 on 6-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
Threaded out bore for screw in style oil cap
1/2"-20 thread pitch lug studs
Rated 3500 lbs. capacity per side
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 14125A outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$170.99